Installation guide

System Configuration
Cluster Setting Defaults
3-99
1. Enter one or more Web sites, host names, IP addresses, ports, endpoints,
or networks, that are accessible to connecting endpoints when they fail
their compliance tests. You can enter these endpoints and services in the
following formats separated by a carriage return. Enter a range of IPs with
a dash (-) between the IPs, or use CIDR addresses. You might also need
to specify the DHCP server IP address in this field. If the Domains
connection method is enabled (System
Configuration>>Quarantining>>802.1X>>Windows domain End-user
authentication method), you must specify your Windows domain controller.
Examples:
Web sites – www.mycompany.com
Host names – bagle.com
IP addresses – 10.0.16.100
Ports – 10.0.16.100:53
Networks – 10.0.16.1/24
Range of IP addresses – 10.0.16.1-10.0.16.5
You do not need to enter the IP address of the NAC 800 server here. If you
Figure 3-45. System Configuration Window, Accessible Services