Installation guide

System Configuration
Logging
3-112
CAUTION: Setting the log level to trace may adversely affect performance.
2. Click ok.
Setting 802.1X Devices Logging Levels
You can configure the amount of diagnostic information written to log files
related to 802.1X re-authentication, ranging from error (error-level messages
only) to trace (everything).
To set 802.1X logging levels:
 NAC 800 home window>>System configuration>>Logging
1. To configure the amount of diagnostic information written to log files
related to 802.1X re-authentication, select a logging level from the 802.1X
devices drop-down list:
• error – log error-level messages only
• warn – log warning-level and above messages only
• info – log info-level and above messages only
• debug – log debug-level and above messages only
• trace – log everything
CAUTION: Setting the log level to trace may adversely affect performance.
2. Click ok.
Setting IDM Logging Levels
You can configure the amount of diagnostic information written to log files
related to IDM, ranging from error (error-level messages only) to trace (every-
thing).
To set IDM logging levels:
 NAC 800 home window>>System configuration>>Logging
1. To configure the amount of diagnostic information written to log files
related to IDM, select a logging level from the IDM drop-down list:
• error – log error-level messages only
• warn – log warning-level messages only