Installation guide

802.1X Quarantine Method
Setting Up the 802.1X Components
11-19
NOTE: If you choose PEAP as your authentication mechanism in step q, see step 8
before completing step r and step s. Adding a certificate, if your server does
not already have one, and configuring PEAP is explained in step 8.
q. Select the EAP type from the drop-down list.
Important: The type selected here must match the type selected for
the endpoint described in step 4, step b on page 11-45.
r. Click Next.
s. Click Finish.
8. The PEAP authentication method requires that a specific type of SSL
certificate is available for use during authentication. These steps assume
there is a Domain Certificate Authority (CA) is available to request a
certificate.
Click Configure.
If you receive the error message shown in figure 11-7, complete these
steps to request a certificate.
These steps assume there is a Domain Certificate Authority (CA) available
Figure 11-16. IAS, Remote Access Policy, Authentication Method