Installation guide

System Administration
System Settings
13-7
No arguments – The system is reset to the same type (either a single-server
installation with the MS and ES on the same server, an MS, or an ES), the
database is cleared, and the property files are restored to their defaults
ms – The system is reset to be an MS, the database is cleared, and the
property files are restored to their defaults
es – The system is reset to be an ES, the database is cleared, and the
property files are restored to their defaults.
TIP: See the installation guide for instructions on resetting the system using the
LCD panel.
NOTE: The resetSystem.py file is in the following directory:
cd /usr/local/nac/bin
Changing Properties
To change the property values in the properties files:
 Command line window
1. Log in as root to the NAC 800 MS using SSH.
2. Enter the following at the command line:
setProperty.py <DESTINATION> <TYPE> <VALUES>
Where:
• <DESTINATION> is one or more of:
-c <cluster name> Set properties on all Enforcement Servers in
cluster
-e <ES hostname> Set properties on Enforcement Server
-a Set properties on all Enforcement Servers
-m Set properties on Management Server
• <TYPE> is
blank, nothing specified
-l Properties are log4j properties