Installation guide

System Administration
Managing Passwords
13-35
Managing Passwords
The passwords associated with your NAC 800 installation are listed in the
following table:
NAC 800
password
Set during Recovery process
NAC 800
Management or
Enforcement
server
Initial install process * See “Resetting the NAC 800 Server
Password” on page 13-36.
NAC 800 database Initial install process * See “Resetting the NAC 800 Database
Password” on page 13-37.
NAC 800 console,
administrator
account
Initial install process * • For known passwords – NAC 800
Home window >> System configuration
>> User accounts
• For unknown passwords – See
“Changing the NAC 800 Administrator
Password” on page 13-37.
endpoint / domain
administrator
Manually entered on the endpoint by the
end-user.
If the end-user has not defined a login/
password combination, the default login is
usually “administrator” with a blank
password.
Known passwords are entered on the
System
configuration>>Windows>>Agentless
credentials window to allow NAC 800 to test
the endpoint.
Password recovery on endpoints is beyond
the scope of this document.
Windows domain Manually entered after installation on the
System
configuration>>Quarantining>>802.1x
Quarantine method radio button window.
Windows domain password recovery is
beyond the scope of this document.
OpenLDAP Manually entered after installation on the
System
configuration>>Quarantining>>802.1x
Quarantine method radio button window.
OpenLDAP password recovery is beyond
the scope of this document.
* See the NAC 800 Installation Guide for the installation process.
Table 13-3.NAC 800 passwords