Installation guide

System Configuration
Enforcement Servers
3-18
 NAC 800 Home window>>System configuration>>Enforcement clusters &
servers>>Select an ES>>Configuration
1. Select a Region from the Region drop-down list in the Date and time area.
2. Select a time zone from the Time zone drop-down list.
3. Click ok.
NOTE: See “Selecting the Time Zone” on page 3-26 for information on changing the
time zone settings for the Management server.
WARNING: Manually changing the date/time by a large amount (other than a time zone
change) will require a restart of all servers. Rolling back the clock will have
adverse effects on the system.
Modifying the ES root Account Password
To change the Enforcement server root account password:
 NAC 800 Home window>>System configuration>>Enforcement clusters &
servers>>Select an ES>>Configuration
1. Enter the new password in the Root password text box in the Other settings
area.
2. Re-enter the password in the Re-enter root password text box.
3. Click ok.
Viewing Enforcement Server Status
There are two ways NAC 800 provides ES status:
■ The icons next to the server name (see Figure 3-6 on page 3-15)
■ The Status window (see the following steps). The Enforcement server
window allows you to view the following information:
•Health status
• Upgrade status
• Process/thread status
• System load average for the server
• Current endpoints being tested/minute for the server