Installation guide

System Configuration
Management Server
3-25
• Set time
NOTE: Date and time settings are applied to the MS; however, you can set the time
zone for each ES.
Automatically Setting the Time
To automatically set the time:
 NAC 800 Home window>>System configuration>>Management server
1. Select Automatically receive NTP updates from and enter one or more
Network Time Protocol (NTP) servers, separated by commas. The NTP
protocol allows NAC 800 to synchronize its date and time with other
endpoints on your network. For example, time.nist.gov.
2. Click ok.
TIP: Use of NTP is strongly recommended.
Manually Setting the Time
To manually set the time:
 NAC 800 Home window>>System configuration>>Management server
1. Select Manually set date & time.
2. Click edit. The Date and time window appears:
Figure 3-10. Date & Time Window