HP ProCurve Switch 8200zl/5400zl/3500 Series Ordering Guide
Part 1: zl series chassis power supply selection (PoE) The HP ProCurve Switch 8200zl/5400zl/3500 series can power any device that adheres to the IEEE 802.3af (PoE) standard; additionally, the 8200zl and 5400zl series can power any device that adheres to the IEEE 802.3at (PoE+) standard. The switches will automatically detect how much power is needed when a compatible device is plugged into the port.
Table 1. Use this table to determine your PoE power needs from Steps 1 and 2.
Table 2. Redundant power definitions No redundancy No power is held in reserve. For system power, if a power supply fails, some or all parts of the switch become inoperative. For PoE power, all power supplied by the available supplies can be used to power PDs. If a power supply fails, the amount of PoE power supplied by the failed supply is no longer available. The switch will turn off the number of PDs starting with the lowest PoE priority PD up to the wattage lost with the failed supply.
Step 4: Choose your power supply or supplies There are three power supplies available for the HP ProCurve Switch 8200zl and 5400zl series. See Table 4 for the minimum and maximum power supply counts for the various zl switches. Table 4. Switch power supply capacities Included supplies Min. # of supplies needed Max. # of supplies possible Max. # of supplies with the power shelf Table 3.
Power cords 3500-24-PoE, the internal power supply can power all 24 ports at 15.4 W for PoE. The additional power The power cords available for these switches are sized available from the HP ProCurve 620 RPS/EPS provides for the increased current that can be drawn to meet full redundancy for the PoE power. the needs of PoE. As a result, they are uncommon and it is recommended to have a few spares on hand.
Part 2: Software licenses To enable Advanced Routing feature set, please order the Premium License specific to the switch series: The HP ProCurve Switch 8200zl, 5400zl, and 3500 series use the same software image base and ship with Intelligent Edge and IP-based routing feature sets standard. For these switches, an optional Premium License is available to enable Advanced Routing features.
Figure 1: Edge and aggregation/distribution use models Aggregation/ Distribution Aggregation/ Distribution Edge Edge Edge Edge Software updates1 for existing customers In keeping with the longstanding value from HP ProCurve Networking, software updates when provided will be free of charge to existing customers. Part 3: Fieldreplaceable units The HP ProCurve Switch 5400zl management module and fan tray are field-replaceable.
Fan tray Rack-mounting kit HP ProCurve Switch 8200zl/5400zl series fan trays can be hot-swapped without system disruption as long as the new tray is installed within three minutes of the previous tray being removed. The switches normally ship with rack-mounting “ears” that allow installation into a two-post, 19-inch datacomm rack. Replacing the HP ProCurve Switch 3500 or Switch 6200yl series fan tray requires that the switch be removed from the rack, power removed, and the top of the switch opened.
RPS/EPS and console cables The HP ProCurve 620 Redundant/External Power Supply (J8696A) and the HP ProCurve Switch zl Power Supply Shelf (J8714A) use cables to individually connect the RPS (620 only) and EPS (PoE) power to the target HP ProCurve 8200zl/5400zl or 3500/6200yl series switches. The same cable is used for either RPS or EPS power.
Jumper cables (PDU to product) If power interconnects between a switch and a power distribution device, such as a power distribution unit (PDU) or an uninterruptible power supply (UPS) is desired, jumper cables are available. The jumper cables for these switches are sized for the increased current that can be drawn to meet the needs of PoE. As a result, these jumper cables meet the environmental and electrical specifications of HP ProCurve switches.
Technology for better business outcomes To learn more, visit www.hp.com/go/procurve © Copyright 2007, 2009 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty.