Product guide

PIM-SM (Sparse Mode)
Displaying PIM-SM Data and Configuration Settings
Listing Currently Configured PIM Interfaces
Syntax: show ip pim interface
Lists the PIM interfaces (VLANs) currently configured in the
router.
VLAN: Lists the VID of each VLAN configured on the switch to
support PIM-DM.
IP Address: Lists the IP addresses of the PIM interfaces
(VLANs).
Mode: Shows dense or sparse, depending on which PIM
protocol is configured on the router.
ProCurve(config)# show ip pim interface
PIM Interfaces
VLAN IP Address Mode
---- --------------- ------------
1 10.1.10.1 sparse
2 10.2.10.1 sparse
Figure 4-16. Example Showing Two PIM Interfaces Configured
Displaying IP PIM VLAN Configurations
Syntax: show ip pim interface [< vid >]
Displays the current configuration for the specified VLAN
(PIM interface). Refer to table 4-1 on page 4-56.
4-55