User guide

For charging, please review the following instructions.

 Lift up the handle of the battery to access the RCA charging input.

 Insert the charging plug from the charger into the battery’s RCA charging input.

 Insert the charger’s power cord into a wall outlet.

 The charger’s LED light will light RED while the charger is charging the battery.

 The charger’s LED light will light GREEN upon the battery being fully charged.

 There is also a battery indicator for checking a full charge. Press the indicator button to display the

battery’s energy storage. The indicator is located under the battery handlebar.

 Once the battery is charged, you should discontinue charging and remove the charger.

 Unplug the charger’s power cord from the wall and remove the charging plug from the battery.

 You are ready to install the battery pack back onto your bicycle.

 To install the battery, first align the bottom of the battery with the battery base rail.

 Once aligned, slide the battery completely into the battery base and until the battery base terminals

insert into the battery’s terminal outlets.

 Once the battery is properly slid into place, you can then turn the key to the “ON” position.

 The LEDs on the throttle in the “ON” position will display a charged battery’s energy capacity.

Chapter 4: Safety

The manual has detailed safety riding methods. In this chapter we will further discuss additional safety guidelines.

a. The basics

Below is a basic guideline according to the CPSC (US Consumer Product Safety Commission) in regards to riding

a bike safely.

 Always wear a helmet to help prevent head injuries.

 Observe all traffic laws and signals, just as automobiles must do.

 Don’t ride double or attempt stunts.

 Ride near the curb in the same direction as traffic.

 Find alternate routes, rather than ride through busy intersections and heavy or high-speed traffic.

 Walk -- don't ride -- your bicycle across busy intersections and left turn corners.

 Avoid riding in wet weather. When wet, handbrakes may require a long distance to stop.

 Avoid riding in the dark. If you do, be sure the bike is equipped with a headlight, a taillight and

reflectors. Apply retro-reflective trim to clothing, or wear reflective vests and jackets.

 Avoid loose clothing or long coats that can catch in pedals or wheels. Leg clips or bands keep pants

legs from tangling in the chain.

 Avoid crossing raised sewer grates.

 Regular maintenance is essential for safe riding. Refer to the maintenance recommendations. If you do

not have basic mechanical skills, an authorized dealer should perform repairs and maintenance.

 Align (or "true") wobbly wheels for better control. Spokes also may need adjustment.

 Replace all missing, damaged, or worn parts; for example, brake pads, chainguards, chain links,

spokes, screws and bolts, handlebar grips.

 Tighten and/or adjust loose parts.

 Periodically inspect frame, fork, spindles and other components for cracking.

 Parts should be adjusted to manufacturer's torque specifications.

 Inflate tires to recommended pressure, and replace worn tires.

 Lightly oil and clean moving parts. Keep oil off rubber.

 Keep bicycle indoors when not in use.