User guide

6
b. Folding and unfolding (SEE PHOTOS BELOW)
Folding: your bicycle has the ability to fold for easy storing and transporting. There is a quick release lever that will
allow the bicycle to fold into an area half of the original size. The pedals can also be folded by squeezing the 2
metal tabs on the outside edges of each pedal, pulling the pedal outwards and then pushing the pedal down. To
fold the bicycle you should stand on the right side of the bicycle (the crank set and chain side) and then un-clasp
the frame hinge lever after turning the small safety release latch up. You will now be able to fold the bicycle in half.
When picking up the bicycle once it has been folded, it is easy to lift by placing one hand under the front portion of
the frame and one hand under the center of the frame in front of the seat tube. If folding the bicycle is to allow for
the ability to store in a closet or small space, after folding you can roll the bicycle on its own wheel using the saddle
nose and handlebar to guide it to the storing area.
Unfolding: your bicycle can easily be unfolded in a matter of seconds. Stand at the right side of the bicycle (the
crank set and chain side) and place one hand around the front portion of the frame and one hand under the center
portion of the frame behind the frame hinge. Open the frame to a straight position until the spring in the hinge clasp
lever locks the lever in place. Close the lever completely and turn the hinge safety release latch down (clockwise) to
lock the frame hinge lever in place. For some, it may be easier to use the handlebar stem and seat post to unfold or
fold the bicycle. Please make sure the seat post and handlebar stem are tight and secured.