Owner`s manual

PRODIGY AutoCode® Blood Glucose Meter PRODIGY AutoCode® Blood Glucose Meter
Owner’s Manual Owner’s Manual
26
STEP 8: Set the Hour
Press and release the “M”
button to advance the hour.
With the correct hour on the
display, press the “SET” button
and the minutes segment will
start ashing. See Figure 13.
STEP 9: Set the Minutes
Press and release the “M”
button to advance the minutes.
With the correct minutes on the
display, press the “SET” button
and the current unit of
measurement will start ashing.
Important: Day averages are calculated from
results obtained during the 7, 14 and 28 days
preceding the current date and time settings.
Figure 12
Figure 13
27
STEP 10: Select Unit of
Measurement See Figure 14.
Press and hold the “M” button
for (4) seconds until the unit of
measurement you are choosing
appears on the display. Press
the “SET” button and the
memory segment will start
ashing. See Figure 15.
To skip this step, press the “SET”
button.
Your meter can display test
results in milligrams per
deciliter (mg/dL) or millimoles
per liter (mmoL/L).
• The mg/dL unit is standard
in the United States.
• The mmol/L unit is standard in Canada.
STEP 11: Delete Memory
When the “dEL” symbol and the ashing “ ”
symbol appear on the display, you can choose to
clear the memory. If you do not want to clear the
memory, press the “SET” button again to skip
this step.
Figure 14
Figure 15