Owner`s manual

PRODIGY AutoCode® Blood Glucose Meter PRODIGY AutoCode® Blood Glucose Meter
Owner’s Manual Owner’s Manual
28
If you want to clear ALL
memory, press the “M” button
for (4) four seconds.
See Figure 16.
The “- - -” will appear to indicate
all memory has been deleted
and the meter will turn off.
Setup is now complete. “OFF”
is displayed and the meter will
turn off. See Figure 17.
Figure 16
Figure 17
29
Control Solution Testing
If your Prodigy® control solution did not come with
a Prodigy® Control Solution Insert, the following
information shall take the place of the insert.
Product Numbers:
Intended Use:
Prodigy® control solution is a red liquid that
contains glucose that will react with test strips and
produce a test result. You can use either high or
low Prodigy® control solution with your Prodigy®
system.
Summary:
Prodigy® control solutions contain certain
amounts of glucose that can be tested with all
Prodigy® brand glucose meters. Test results
should fall within the control ranges printed on
the back of your Prodigy® test strip vial.
990310 (Low) 53310 (Low) 53350 (High)