Owner`s manual

PRODIGY Owner’s Manual PRODIGY Owner’s Manual
Prodigy Diabetes Care, LLC www.prodigymeter.com
26
27
Prodigy Diabetes Care, LLC 1.800.243.2636
Speaking Function
The Prodigy AutoCode
®
meter talks you through each step of your
testing procedure.
When does the
meter speak?
When the meter is
turned on.
When room temperature is
outside operating range; which
is 50°F–104°F (10°C– 40°C).
When the meter is ready to test
( appears on display).
When the test is completed
(the result appears on the
display).
When you turn off the meter.
When a used test strip is
inserted.
What does the
meter say?
Your Prodigy
®
meter is on. Please
wait. Please insert the test strip.
Room temperature is out
of range.
Please apply blood into the test
strip.
Blood glucose (number)
milligrams per deciliter/
millimoles per liter.
Goodbye.
Test strip has been used.
Setup Steps
The Prodigy AutoCode
®
meter has the language, volume, time,
date and unit of measure presets. However, if you replace the batteries,
you should check the time and date.
STEP 1: Insert the Batteries
Open the battery cover located on the backside of the meter. Insert two
(2) AAA Alkaline batteries and align them properly.
STEP 2: Enter Setup Mode
Press and hold the “SET” button located in the battery compartment.
The meter is now in the setup mode.
Voice Speaks: “Your Prodigy
®
meter is on.
Please wait. Setting mode. English.”
STEP 3: Select Language
Thelanguageoptionappearsrstwith“L-1” on
the LCD. By default, “L-1” indicates the default
language (English); “L-2” indicates the second
language (Spanish); “L-3” indicates the third
language (French); and “L-4” indicates the fourth
language (Arabic). See Figure 18.
Press the “M” button to select a language. With the correct language
selected, press the “SET” button and a number will appear.
Figure 18