Owner`s manual

PRODIGY Owner’s Manual PRODIGY Owner’s Manual
Prodigy Diabetes Care, LLC www.prodigymeter.com
40
41
Prodigy Diabetes Care, LLC 1.800.243.2636
Setup Steps
The Prodigy Pocket
®
meter has the date, time and unit of
measurement presets. However, if you replace the battery, you should
check and update the time and date.
STEP 1: Insert the Battery
Open the battery cover located on the backside of the meter. Insert one
(1) 3 Volt CR2032 lithium battery. The meter should beep and turn on.
STEP 2: Enter Setup Mode
Start with the meter off. Then press the “SET” button located in the
battery compartment. The meter is now in the setup mode.
STEP 3: Set the Year
Theyearappearswiththenumberashing.Pressandreleasethe
“M” button to advance the year. With the correct year on the display,
press the “SET” button and the date will appear on the display with
themonthsegmentashing.
See Figure 42.
STEP 4: Set the Month
Press and release the “M” button
to advance the month. With the
correct month on the display, press
the “SET” button and the date
segmentwillstartashing.
See Figure 43.
Figure 42
Figure 43
STEP 5: Set the Date
Press and release the “M” button to
advance the date. With the
correct date on the display, press
the “SET” button and the time will
appear on the display with the hour
segmentashing.
See Figure 44.
STEP 6: Set the Hour
Press and release the “M” button to
advance the hour. With the correct
hour on the display, press the “SET”
button and the minutes segment
willstartashing.
See Figure 45.
STEP 7: Set the Minutes
Press and release the “M” button
to advance the minutes. With the
correct minute on the display, press
the “SET” button and the current
unit of measurement will start
ashing.See Figure 46.
Important: Day averages are calculated from results obtained
during the 7, 14 and 28 days preceding the current date and time
settings. When the date and time are changed, the 7, 14 and
28–day averages may change.
Figure 45
Figure 46
Figure 44