Specifications

No contractual pictures

-2-

2 – Connections

To ensure the proper implementation of your monitor system, please adhere to the following

procedures at all times:

1. Check your audio lead.

2. Switch on the other equipment you intend to use (audio mixer, PC, audio source, etc.)

3. Check your monitor settings and the settings of your audio sources (lowest volume).

4. Check the voltage , switch on the Prodipe monitors by putting switch  in the ON

position and the blue LED  will light up.

Note that: when you want to shut everything down, the Prodipe monitors must be switched

off first (Switch  in the OFF position and the blue LED  off).

Careful: choosing the 'AC Select'  voltage depends on your power supply. You should

make any changes when the system has been switched off (Switch  in the OFF position

and the power supply lead unplugged).

Pro 5V2

Pro 8V2

Pro 10SV2

SOURCE

100V –

120V

220V –

240V

100V –

120V

220V –

240V

100V –

120V

220V –

240V

AC SELECT 

115V

230V

115V

230V

115V

230V

FUSIBLE 

500mA

3.15A

1.6A

Figure 2