APPC-10SLB(W) User Manual
Content Declaration ............................................................................................................. 3 Product Instruction .................................................................................................. 3 Power on the Product ............................................................................................. 5 Without Mounting Bracket.................................................................................. 5 Use Mounting Bracket ............
Declaration Please read the instructions carefully before equipment installation and using the device. Do not put the product in high temperature, humid or dusty environment. Do not drop, crash or break down this product. This product is without battery, and after setting up any Settings on the Settings, it is recommended that the user should not immediately shutdown and confirm. Please wait for at least 5s before shutting down. For the system to save Settings data to database.
1. Power Key: (1).Short press sleep and wake up (2).Long press to pop out the power off and reboot dialog box 2. SD Card Slot / Cover: support external SD card 3. Exit Button: return to the previous page 4. Function Keys (Up / Down): select the up/down item 5.
6. DC In Jack: powered by 12V/2A DC input 7. LED Indicator: Green Power supply is on. Red sleep state. 8. Headphone:3.5mm Stereo + MIC 9. HDMI Port: HDMI Type A output (covered, for production test only) 10. Add-on module slot: to put optional add-on module 11. Micro-USB Port: support Micro-USB 2.0 12. USB Port: support USB 2.0 Host type A 13. 10/100/1000Mbps RJ45 Ethernet Port: support Ethernet connection 14. VESA Mount Holes: for installing the bracket 15. Speakers: 8ohm / 2W 16. WIFI: 802.
Insert SD Card This product supports external SD card. Please insert your SD card into the SD Card Slot (#2 in Product Instruction) on the top of this product. Insert USB Devices This product supports USB and Micro-USB to deal with your files. USB Plug your USB memory into the USB port (#12 in Product Instruction) on the bottom of this product, and then you can do the file operations via the File Browser. (See in Browse Files).
Click the “USB debugging connected” Entry “Developer options” interface; Click the “USB for file transfer” access to the USB use options interface.
Display different content for double This product supports display different content for double screen. Please plug one side of the HDMI cable into the HDMI port (#9 in Product Instruction) on the bottom of this product, and plug the other side of the HDMI cable into the HDMI port of the monitor. Display screen and this product display different interface. Dual screen show different content Guide: 1. Enter settings to display outputs; 2.
3. Open at least two running programs .For example, video and browser; 4. Slide your finger from the right side to left on the touch panel, then you will see two buttons; : This button is different display button.
5. Click the button, the video display will only stay on HDMI monitor, and the APPC-10SLB(W) will display previous apk screen; 6. If you want close the different display, please repeat step 4 and then click button, the APPC-10SLB(W) and HDMI monitor will display same screen.
Home Screen In the home screen, you can long-press the blank space to change the wallpaper or drag widgets to desktop. Change Wallpaper: 1. Click “WALLPAPERS”. 2. Select one picture from system presets or your own pictures.
3. Click “Set wallpaper” on the middle corner of the screen to apply the wallpaper. Add Widgets: 1. Click “WIDGETS”.
2. Long-press a widget and drag it to desktop. 3. If you want to remove an icon, long-press the widget and drag it onto “×Remove” at the top of the screen and drop it until it turns light gray.
System Bar Navigation Buttons 1. Volume-: Decrease the system volume. 2. Back: Return to the previous page. 3. Home: Return to the home screen. 4. Recents: Switch between recently used apps.
To delete an application from the list, you can delete the application by clicking on the "X" icon in the upper right corner or Left and right removal. Click on the middle of the three to delete the X Icon. 5. Volume+: Increase the system volume.
Status Notifications Status bar at top of the screen displays system status, such as time, Wi-Fi, and USB connection etc.
Applications Click at the bottom of home screen to enter the applications page. The installed applications will be shown here and you can open an app by clicking its icon. To find an app easily, you can create a shortcut by long-pressing of the icon and drag it to the home screen.
Language In the App list, click “Settings” to open the system setting app, and select the option “Language & input”. Click the first option “Language” under “Language & input”, and then you can change the system language according to your preference.
Date & Time In the App list, click “Settings” the option “Date & time”. to open the system setting app, and select If you enabled the option “Automatic date & time” under “Date & time”, system date and time will be synchronized automatically with network time when you connected a Wi-Fi network. If you want to set the time manually, you need to disable “Automatic date & time” and “Automatic time zone”.
In this option, you can also set time zone, time notation and date format. Volume On the system bar, click the Volume- icon to decrease the system volume, and click the Volume+ icon to increase the system volume. Or you can press the function keys (#5 in Product Instruction) on the top of the product to adjust the volume.
Brightness Pull down the screen and open the shortcut window, then click "brightness". Left and right sliding brightness bar to adjust brightness.
Scheduled This function is used to power the device on and off automatically at the set time. In the App list, click “Settings” select the option “Scheduled”. to open the system setting app, and Click the single option “Set Scheduled Shutdown Clocks”. Click the option “Time” to set the power off time of this device.
Click the option “Repeat” to select the days which will power off this device at the set time. After setting, click “Done” at the upper-right corner of the screen to save them.
Follow the above steps to set the ”Reboot”, “Sleep ON” and “Sleep OFF” times.
Wi-Fi In the App list, click “Settings” the option “Wi-Fi”. to open the system setting app, and select Switch the Wi-Fi button to ON. The product will scan available wireless networks automatically. Select a network under Wi-Fi networks and input the password to connect.
Ethernet In the App list, click “Settings” “Ethernet” at the left side. to open the system setting app, select Check “Use Ethernet” and plug the Internet cable into the Ethernet port (#13 in Product Instruction). If Wi-Fi is on, please turn off Wi-Fi to allow Ethernet working. If you are Static IP user, please set the configurations manually.
Bluetooth In the App list, click “Settings” the option “Bluetooth”. to open the system setting app, and select Switch the Bluetooth button to ON. The product will scan ambient available Bluetooth devices automatically.
If you want to pair another Bluetooth device, select it from the “Available Devices” list, and then click “Pair” in the pop-up window. At the same time, click “Pair” in the pop-up window of the Bluetooth device to be paired. After pairing, the paired device will be moved to the “Paired Devices” list.
Click the three point icon in the upper right corner to pop up the setting interface, and select refresh、rename this device and show received files. Virtual Keyboard The device provides a virtual keyboard for typing. You can use it as a real one. When you click in a text input box, the virtual keyboard will appear at the bottom of the screen. To collapse the virtual keyboard, you can click the icon 29 in the system bar.
Switch Input Methods If the keyboard icon is invisible, please check whether the installed input method is selected in the “Language & input” option under the system setting app. Select the current keyboard option to bring up the change keyboard dialog box.
Surf Online In the App list, open “Browser” . When connecting the device to a network, you can visit websites, play online media or download files via the browser. In a browser window, enter in a URL in the address bar and click “Go” in the virtual keyboard to go. You can also click to add new tabs to make multiple tabs opened simultaneously.
Browse Files In the App list, open “Explorer” to view local files. Take the usb drive as an example.
Long-press a file or folder to do file operations, such as copy, delete, move (cut), paste, rename, send (share) and create shortcut. If you want to select several files/folders at once, click “Multi” in the menu, and then select files/folders. The selected files/folders will be highlighted in orange. Click “Editor” in the menu to operate the selected files/folders.
Play Media With the provided apps, you can play your media files on your storage, such as pictures, music and videos. Picture Player: Support JPG, BMP, GIF. Music Player: Support MP2, WMA, WAV, AAC, OGG, ASF. Video Player: Support MKV, TS, FLV, AVI, VOB, MPG, DAT, ASF, RM, MOV, 3GP, MP4, WMV.
Install & Uninstall Apps Install Apps Before installing an app, please download the app (.apk) to via the browser, or copy a downloaded app to the device from your computer. Then you can open “ApkInstaller” app. in the App list to install the downloaded First installation prompt “you need grant access READ_EXTERNAL_STORAGE” select ok. Choose “Allow”.
Enter the installation interface and click Install. The apk files will be automatically scanned in the right side list. Click the apk you want to install.
Click “Install” or “Next” until it turns to “Install”, and then waiting for installation finished. You can also download an android app market, and install the apps via the market. If “Install blocked” is prompted when installing an app, please open “Settings” and select the option “Security”, allow “Unknown sources” and then back to reinstall the app.
Uninstall Apps To uninstall an app, please open “Settings” in the App list and select the option “Apps”. In this option, you will see the installed apps list. Click the app you want to remove to enter the detail page.
Click the “Uninstall” button and select “OK”, and then waiting for uninstallation finished. Reset to Factory Default Please make sure to back up the important data before resetting the device. In the App list, click “Settings” the option “Backup & reset”.
Click “Factory data reset”. Click “Reset tablet” button.
Click “Erase everything” button. When the factory data reset window appears, wait for the system to restart and reset to the factory default.
Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.