USER’S MANUAL AUDIO DISTRIBUTOR ADIS5
1. IMPORTANT SAFETY INSTRUCTIONS CAUTION: To reduce the risk of electric shock do not remove cover (or back panel). No user serviceable parts inside. Refer servicing to qualified personnel only. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. This symbol is intended to alert the user of the presence of uninsulated dangerous voltage within the product enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Sentences preceded by symbol contain important safety instruction. Please read it carefully. DETAILED SAFETY INSTRUCTIONS. Water and moisture: This apparatus should not be used near water (i.e. bathtub, kitchen sink, swimming pools, etc.) Ventilation: This apparatus should be placed in a position that doesn’t interfere with correct ventilation.
Objects or liquid entry inside the unit: Be careful that no objects fall or liquid is spilled inside the unit through ventilation openings. Safe power line use: • Keep firmly the plug and the wall outlet while disconnecting the unit from AC power. • If you’re not going to use the unit for a long period of time, please unplug the power cord from AC power outlet. • To avoid unit power cord damaging, please don’t strain the AC power cable and don’t bundle it.
• To obtain good speakers wire contacts, please tighten the screw terminals firmly. • For safety reason, don’t defeat the grounding connection. Grounding is useful for user safety. Use only connectors and accessories suggested by the manufacturer. . This unit should be placed in a rack (see INSTALLATION) and kept far from: Wet places Direct exposure to heat sources (like sun light) Non properly ventilated places Disconnect the power cord during storms or when the unit is not used.
Front panel description 1. 2. 3. 4. Power switch and LED Input peak level LED indicators Mono/stereo switch Independent output level controls for CH1 and CH2 sections Rear panel description 1. 2. 3. 4. 5. IEC standard AC power supply socket Fuse-holder AC power selector Section CH1 and CH2 output connections CH1 and CH2 input connections Installation 1. AC power supply connection. To connect this unit to AC power supply please use supplied linecord.
1. Input connections Input connectors are two independent balanced XLR (CH1, CH2). These connectors may be used for line level signals of different sound sources (CD player, tuner, tape, etc. Each source can be independently routed to each output (OUTPUT1, 2, 3, 4, 5). 2. Output connections There are ten independent balanced XLR output connectors, divided in two sections (CH1, CH2). Each output level control can be individually adjusted by its level control located on unit front panel (fig.1 ref.4).
e. Please move clockwise all the volume knobs to increase output levels, counter-clockwise to reduce output levels. Warning: before connecting and/or disconnecting any sound source to this unit, in order to avoid forthcoming units damages please make sure that the output knobs are set totally counter-clockwise.
The product is in compliance with Directive 89/336/EEC (Electromagnetic Compatibility) and following modifications 92/31/EEC and 93/68/EEC, as the following standards: EN 50082-1:1997, EN 55013:1990, EN 55020:1994 it is also in compliance with Directive 73/23/EEC (Low Voltage) and following modifications 93/68/EEC, as the following standard: EN 60065:1998 Proel SpA pursue a policy of continuous research and development.
PROEL S.p.A. (World Headquarters - Factory) Via alla Ruenia 37/43 64027 Sant’Omero (Te) – Italy Tel: +39 0861 811241 Fax: +39 0861 887862 E-mail: info@proelgroup.com installation.proelgroup.
