User manual

5. Guide to System Setup 5.1. SUSPENDING AX3210P AND AX1118SP SYSTEMS
As the array is being lifted, you can take away the caster boards. To disengage the boards press
and turn the catch pins. This operation is rather simple and it does not require more than one
operator.

12. The array is completely off the ground
• Arranging the position of the array
At this point the array can be lifted to the desired height and fastened with ropes to avoid its rotation
or oscillation due to the wind, especially when you are using only one flying point.
Once the array has been positioned correctly, the flying device has to be checked to assure safety
according to all current local and national regulations.
Sequence of disassembly operations
Disassembly operations are exactly the same described for assembling the array, you need only to
reverse their sequence.
Load limits
Load limits have been determined during the design phase by calculations executed through modelling
of the finished elements then validated by empirical load tests.
Flying bar KPTAX3210 can hold up to 24 AX3210P systems.
Figure 5.9 shows some configurations that have been verified; please contact Proel’s Technical Office
if you need to verify any other configuration.
51