User manual

5.3. SUSPENDING AX2265P AND AX1115SP SYSTEMS 5. Guide to System Setup
Figure 5.21: AX2265P array is lifted off the ground


8. The array is lifted further
9. The array is completely set
At the end of these operations the last element of the array still lies on the ground and the array is
ready to be lifted.
• The array is lifted off the ground
In this phase the array has to be eased in its natural movement by holding the handles on the last
enclosure of the array to avoid a sharp forward shifting toward the natural ver tical centre provided
by the lifting point. We advise operating on the vertical lifting point as much as possible in order to
keep the array from shifting forward.
During the lifting phase, and particularly when there is only one case board left on the ground, do
not stop the ascent, or you will damage the only case board supporting the weight of the whole
array.
As the array is being lifted, you can take away the case boards.
68