LED PAR64 USER MANUAL www.venuelightingeffects.
INTRODUCTION The LED PAR64 is a DMX intelligent LED Par Can. This Par Can is lightweight and compact which makes it a great piece for Houses of Worship, mobile DJs, and clubs. This unit can be used as a stand alone fixture in sound-activated mode, or controlled via DMX controller. WARNING To prevent or reduce the risk of electrical shock or fire, do not expose this unit to moisture. CAUTION There are no user-serviceable parts inside this unit.
SAFETY PRECAUTIONS • • • • • • • • • • • • • • • • To reduce the risk of electrical shock or fire, do not expose this unit to moisture. Do not spill water or other liquids into or on your unit. Be sure that the local power outlet matches that of the required voltage for your unit. Do not attempt to operate this unit if the power cord has been frayed or broken. Do not attempt to remove or break off the ground prong from the electrical cord.
SET UP Power Supply: Before plugging your unit in, be sure the source voltage in your area matches the required voltage for your Venue LED PAR64. Because line voltage may vary from venue to venue, you should be sure your unit voltage requirements match the wall outlet voltage before attempting to operate. DMX-512: DMX is short for Digital Multiplex. This is a universal protocol used as a form of communication between intelligent fixtures and controllers.
OPERATING INSTRUCTIONS Operating Modes: You can use the LED PAR64 in four ways: • Sound-Active mode - Reacts to sound, chasing through the built-in programs. • Auto Mode - Automatically chases through the different colors. • RGB Mode - Projects a single color or colors to stay static. • DMX control mode - This function will allow you to control each individual fixture with a standard DMX 512 controller.
PHOTOMETRIC CHART LED PAR 64 R(51) 49 G(49) 201 B(51) 11.1 RGB(151) 214 2.5 10.4 0.8 11.3 0.8 3.0 0.3 3.1 0.4 1.5 0.2 1.5 5 2.7 10 5.4 15 8 P64LED LUX LUX LUX LUX 20 10.7 Meter Meter 30˚ 10 8 6 4 2 0 2 4 6 8 10 0.2 0.9 0.1 0.9 Distance 1 3eam Diameter 0.
CLEANING Due to fog residue, smoke, and dust, clean the internal and external optical lenses periodically to optimize light output. 1. Use normal glass cleaner and a soft cloth to wipe down the outside casing. 2. Clean the external optics with glass cleaner and a soft cloth every 20 days. 3. A lways dry all parts completely before plugging the unit back in. Cleaning frequency depends on the environment in which the fixture operates (i.e. smoke, fog residue, dust, dew).
Important safety instructions This symbol is intended to alert the user to the presence of non-insulated “dangerous voltage” within the products enclosure. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the unit. Apparatus shall not be exposed to dripping or splashing. Objects filled with liquids, such as vases, shall not be placed on the apparatus. 1.
