User`s manual
13
ENG ITA
to internal e ect. Use it to reduce the level of signal sent
to the internal e ect is the PEAK LED is ashing. This
control ranges from o through unity (the center detent
position) on up to 15 dB of extra gain (fully clockwise).
51. MIX / 1-2 switch
This switch assigns the FX output signal to the MAIN
MIX bus (if dis-engaged) or to the GROUP 1-2 bus (if
engaged). Typically, it is set to MIX if the internal e ect
is used only for channels assigned to MIX bus or to 1-2
if the internal e ect is used only for channels assigned
to 1-2 bus.
52. FX LEVEL control
It adjusts the level of the internal e ect signal sent to
the MAIN MIX or GROUP 1-2 outputs.
53. FX TO AUX1
It adjusts the level of the internal e ect signal sent to
the AUX 1 output.
54. FX TO AUX2
It adjusts the level of the internal e ect signal sent to
the AUX 2 output.
interno del mixer (pedali suggeriti sono i modelli PROEL PFS20,
PFS24, PFS29).
50. AUX 3 / FX SEND LEVEL control
Regola il livello generale dell'uscita jack AUX 3 ed anche il
segnale inviato all'e etto interno. Da utilizzare per evitare
l'accensione del LED PEAK dell'effetto interno. Questo
controllo varia tra spento al minimo, passando per guadagno
nullo nella posizione centrale, no a un guadagno di 15 dB se
ruotato al massimo.
51. MIX / 1-2 switch
Questo interruttore assegna il segnale di uscita dell'effetto
interno FX al bus MAIN MIX (se è sollevato) o al bus GROUP 1-2
(se è abbassato). Solitamente è impostato su MIX se l'e etto
interno è usato solo su canali assegnati al bus MIX oppure su 1-2
se l'e etto interno è usato solo su canali assegnati al bus 1-2.
52. FX LEVEL (livello e etto)
Regola il livello del segnale dell'e etto interno inviato alle uscite
MAIN MIX o GROUP 1-2.
53. FX TO AUX1 (livello e etto su AUX 1)
Regola il livello del segnale dell'e etto interno verso l'uscita
AUX1.
54. FX TO AUX2 (livello e etto su AUX 2)
Regola il livello del segnale dell'e etto interno verso l'uscita
AUX2.
DIGITAL EFFECT PROCESSOR
PROCESSORE DIGITALE DI EFFETTO