Operating instructions

- Disconnect the fixture from power and allow it to cool for 20 minutes.

- Remove upper cover.

- Vacuum or gently blow away dust and loose particles with compressed air.

- Remove stuck particles with an unscented tissue or cotton swab moistened with glass cleaner or

distilled water. Do not rub the surface: lift the particles off with a soft repeated press.

- Remove smoke, and other, residues with cotton swabs or unscented tissues moistened with

isopropyl alcohol. A commercial glass cleaner may be used, but residues must be removed with

distilled water. Clean with a slow circular motion from center to edge. Dry with a clean, soft and

lintfree cloth or compressed air.

- Close the fixture cover and tighten the thumb screw, taking care not to trap any loose wires.

TECHNICAL DATA

PLFON200 – PLFON205

Power supply: AC 230V – 50Hz

Lamp: Dichroic 12V – 100W

Code: PLLP10012D

Dimensions: LxWxH mm.320x140x190

Weight: kg. 2.9