User`s manual

25
Screw one clamp each via a M12 screw and nut onto the Omega-holders.
Insert the quick-lock fasteners of the first Omega-holder into the respective holes on the
bottom of the device. Tighten the quick-lock fasteners fully clockwise. Install the second
Omega-holder.
DANGER TO LIFE: before taking into operation for the first time, the installation has to
be approved by an expert.
DMX-512 CONNECTION / CONNECTION BETWEEN FIXTURES
The wires must not come into contact with each other, otherwise the fixtures will not work
at all, or not will work properly.
Only use a stereo shielded cable and 3-pin XLR-plugs and connectors in order to
connect the controller with the fixture or one fixture with another.
OCCUPATION OF XLR-CONNECTION:
Projector 3
Starting address 21
Projector 2
Starting address 11
Projector 1
Starting address 1
DMX-512 Controller
DMX-output
XLR mounting-socket
DMX-input
XLR mounting socket