User manual

3
INDEX
TECHNICAL SPECIFICATIONS . . . . . . . . . . . . . . . . . 3
FREQUENCY RESPONSE . . . . . . . . . . . . . . . . . . . . . 4
DIMENSIONS AND FLYING POINTS . . . . . . . . . . . . . 4
ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
FLASH8A CONTROL PANEL (FIG.1) . . . . . . . . . . . . . 6
FLASH8A CONNECTIONS (FIG.2) . . . . . . . . . . . . . . 6
FLASH8A CONFIGURATIONS (FIG.3) . . . . . . . . . . . . 7
FLASH8P INPUT PANEL (FIG.4) . . . . . . . . . . . . . . . . 8
FLASH8P CONNECTIONS (FIG.5) . . . . . . . . . . . . . . . 8
FLASH8P CONFIGURATIONS (FIG.6) . . . . . . . . . . . . 9
SAFETY AND PRECAUTIONS . . . . . . . . . . . . . . . . . 10
IN CASE OF FAULT . . . . . . . . . . . . . . . . . . . . . . . . . 10
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . 10
CE CONFORMITY . . . . . . . . . . . . . . . . . . . . . . . . . . 11
INSTALLATION AND DISCLAIMER . . . . . . . . . . . . . 11
POWER SUPPLY AND MAINTENANCE . . . . . . . . . 11
GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . 12
FLASH8A INSTRUCTIONS (FIG. 1 / 2 / 3) . . . . . . . 12
FLASH8P INSTRUCTIONS (FIG. 4 / 5 / 6) . . . . . . . 14
INDICE
SPECIFICHE TECNICHE . . . . . . . . . . . . . . . . . . . . . . 3
RISPOSTA IN FREQUENZA . . . . . . . . . . . . . . . . . . . . 4
DIMENSIONI E PUNTI DI SOSPENSIONE. . . . . . . . . 4
ACCESSORI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
FLASH8A PANNELLO DI CONTROLLO (FIG.1) . . . . . 6
FLASH8A CONNESSIONI (FIG.2) . . . . . . . . . . . . . . . 6
FLASH8A CONFIGURAZIONI (FIG.3) . . . . . . . . . . . . 7
FLASH8P PANNELLO INGRESSO (FIG.4) . . . . . . . . . 8
FLASH8P CONNESSIONI (FIG.5) . . . . . . . . . . . . . . . 8
FLASH8P CONFIGURAZIONI (FIG.6) . . . . . . . . . . . . 9
AVVERTENZE PER LA SICUREZZA . . . . . . . . . . . . . 15
IN CASO DI GUASTO . . . . . . . . . . . . . . . . . . . . . . . 15
PROBLEMATICHE COMUNI . . . . . . . . . . . . . . . . . . 15
CONFORMITÀ CE . . . . . . . . . . . . . . . . . . . . . . . . . . 16
INSTALLAZIONE E LIMITAZIONI D’USO . . . . . . . . . 16
ALIMENTAZIONE E MANUTENZIONE . . . . . . . . . . 16
INFORMAZIONI GENERALI . . . . . . . . . . . . . . . . . . 17
FLASH8A ISTRUZIONI (FIG. 1 / 2 / 3) . . . . . . . . . . 17
FLASH8P ISTRUZIONI (FIG. 4 / 5 / 6) . . . . . . . . . . 19
MODEL FLASH8A V2 FLASH8P V2 MODELLO FLASH8A V2 FLASH8P V2
System type 2-way vented enclosure Sistema 2 vie bass-refl ex
High Frequency Device 1’’ compression driver with aluminium voice coil Altoparlante al driver a compressione 1" con bobina in alluminio
Low Frequency Device 8” woofer with 1.8"VC Altoparlante bassi woofer 8" con bobina da 1.8"
Angular Coverage 90° H x 60° V Copertura angolare 90° H x 60° V
Frequency Response 60 Hz - 20 kHz 70 Hz - 20 kHz Risposta in Frequenza 60 Hz - 20 kHz 70 Hz - 20 kHz
Sensi vity - 96 dBspl @ 1W / 1m Sensibilità - 96 dBspl @ 1W / 1m
Crossover Frequency 3000 Hz 3000 Hz Frequenza Crossover 3000 Hz 3000 Hz
Nominal Impedance - 8 ohm Impedenza Nominale - 8 ohm
Power Ra ng (con nuous) - 150 W Potenza Con nua - 150 W
Max SPL at 1mt (peak) 122 dBspl 121 dBspl SPL max a 1m (picco) 122 dBspl 121 dBspl
Total peak power 600 W 300 W Potenza massima di picco 600 W 300 W
HF Amplifi er Cont. Power 50 W Class AB - Potenza Con nua Amp. AF 50 W Classe AB -
LF Amplifi er Cont. Power 250 W Class D - Potenza Con nua Amp. BF 250 W Classe D -
Power Supply type SMPS Tipo alimentazione SMPS
Input Impedance 30 kohm balanced
15 kohm unbalanced
- Impedenza ingresso 30 kohm bilanciato
15 kohm sbilanciato
-
Input Sensi vity LINE: +4 dBu / MIC: +34 dBu - Sensibilità ingresso LINE: +4 dBu / MIC: +34 dBu -
Controls MIC GAIN, LINE LEVEL,
LOW EQ, HIGH EQ, GND li
- Controlli MIC GAIN, LINE LEVEL, LOW
EQ, HIGH EQ, GND lif
-
Connectors MIC: XLR-F
LINE: Combo XLR-F / JACK
LINK: XLR-M
2 x NL4 speakon
(linked)
Conne ori MIC: XLR-F
LINE: Combo XLR-F / JACK
LINK: XLR-M
2 x NL4 speakon
(in parallelo)
Power Supply 230 V~ or 120 V~ - 50/60 Hz - Tensione alim. di rete 230 V~ or 120 V~ - 50/60 Hz -
Rated Consump on 230 W - Consumo nominale 230 W -
Construc on Hi Density Polypropylene with Metal Grid Costruzione Polipropilene Alta Densità con Griglia in Metallo
Flying System 4 x M8 Sistema di sospensione 4 x M8
Moun ng Pole 1 x bo om Flangia per suppor 1 x so o
Monitor taper 42° Inclinazione monitor 42°
Weight 8.5 Kg (18.7 lb) 8 Kg (17.6 lb) Peso 8.5 Kg 8 Kg
Dimensions (W x H x D) 270 x 420 x 260 mm Dimensioni (LxAxP) 270 x 420 x 260 mm
TECHNICAL SPECIFICATIONS SPECIFICHE TECNICHE