WEDGE SERIES ac ve wedge monitors USER MANUAL MANUALE D'USO
FCC COMPLIANCE NOTICE This device complies with part 15 of the FCC rules. Opera on is subject to the following two condi ons: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired opera on. CAUTION: Changes or modifica ons not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
INDEX INDICE FCC COMPLIANCE NOTICE . . . . . . . . . . . . . . . . . . . 2 DIMENSIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 TECHNICAL SPECIFICATIONS . . . . . . . . . . . . . . . . . 4 FREQUENCY RESPONSE . . . . . . . . . . . . . . . . . . . . . 5 ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 CONTROL PANEL (FIG.1) . . . . . . . . . . . . . . . . . . . . . 6 CONNECTIONS (FIG.2) . . . . . . . . . . . . . . . . . . . . . . 6 CONFIGURATION EXAMPLES (FIG.3) . .
TECHNICAL SPECIFICATIONS SPECIFICHE TECNICHE MODEL WD10A WD12A WD15A System type 2-way coaxial vented stage monitor 2-way coaxial vented stage monitor 2-way coaxial vented stage monitor Low Frequency Device 10” woofer with 2"VC 12” woofer with 2.5"VC 15” woofer with 3"VC High Frequency Device 1” neo compression driver with 1"VC 1” compression driver with 1.35"VC 1” compression driver with 1.
FREQUENCY RESPONSE RISPOSTA IN FREQUENZA WD10A - preset MONITOR WD10A - preset FOH 20 20 dB dB 10 10 0 0 -10 -10 -20 -20 -30 40 50 100 200 500 1k 2k Hz 5k 10k 20k WD12A - preset MONITOR -30 40 50 100 200 500 1k 2k Hz 5k 10k 20k 500 1k 2k Hz 5k 10k 20k 500 1k 2k Hz 5k 10k 20k WD12A - preset FOH 20 20 dB dB 10 10 0 0 -10 -10 -20 -20 -30 40 50 100 200 500 1k 2k Hz 5k 10k 20k WD15A - preset MONITOR -30 40 50 100 200 WD15A - preset
CONTROL PANEL (FIG.1) PANNELLO DI CONTROLLO (FIG.1) 2 4 1 5 0 8 ON SIGN LIMIT 10 LEVEL LINK 3 LINE IN MONITOR FOH 6 220-240VAC FUSE T2 AL 250V 100-120VAC FUSE T4 AL 250V POWER 220-240VAC 100-120VAC 50/60Hz 200W 7 9 DESIGNED & ENGINEERED BY PROEL MADE IN CHINA CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS: RISQUE DE CHOC ELECTRIQUE, NE PAS OUVRIR CONNECTIONS (FIG.
CONFIGURATION EXAMPLES (FIG.3) ESEMPI CONFIGURAZIONI (FIG.
SAFETY AND PRECAUTIONS • CAUTION: before using this product read carefully the following safety instruc ons. Take a look of this manual en rely and preserve it for future reference. When using any electric product, basic precau ons should always be taken, including the following: – To reduce the risk, close supervision is necessary when the product is used near children. – Protect the apparatus from atmospheric agents and keep it away from water, rain and high humidity places.
CE CONFORMITY • Proel products comply with direc ve 2004/108/EC (EMC), as stated in EN 55103-1 and EN 55103-2 standards and with direc ve 2006/95/CE (LVD), as stated in EN 60065 standard. • Under the EM disturbance, the ra o of signal-noise will be changed above 10dB. PACKAGING, SHIPPING AND COMPLAINT • This unit package has been submi ed to ISTA 1A integrity tests. We suggest you control the unit condi ons immediately a er unpacking it. • If any damage is found, immediately advise the dealer.
GENERAL INFORMATION Thank you for having chosen a PROEL product. The new WEDGE Series by PROEL is a complete range of ac ve stage monitors designed to offer not only to professional musicians and rental companies, but also to amateur musicians and nonprofessional users, a highly valuable monitoring solu on at a very affordable price. Each of the three WD models provides a perfect sound intelligibility and a high SPL in an extremely lightweight and portable enclosure.
6. PRESET MONITOR/FOH selector This switch allows the selec on between two equalisa on se ngs, suited to two different uses. MONITOR Suited for stage monitoring sound reinforcement for an improved feedback rejec on. FOH This preset has been designed for typical sound reinforcement applica ons with the speaker mounted on floor stand. 7. POWER switch Speaker is "ON" when the switch is in the "I" posi on. NOTE: When you shut down your equipment, turn off the speaker first.
AVVERTENZE PER LA SICUREZZA • ATTENZIONE: Durante le fasi di uso o manutenzione, devono essere prese alcune precauzioni onde evitare danneggiamen alle stru ure meccaniche ed ele roniche del prodo o. Prima di u lizzare il prodo o, si prega di leggere a entamente le seguen istruzioni per la sicurezza. Prendere visione del manuale d’uso e conservarlo per successive consultazioni: – In presenza di bambini, controllare che il prodo o non rappresen un pericolo.
CONFORMITÀ CE • I Prodo Proel sono conformi alla dire va 2004/108/EC (EMC), secondo gli standard EN 55103-1 ed EN 55103-2 ed alla dire va 2006/95/CE (LVD), secondo lo standard EN 60065. • Se so oposto a disturbi EM, il rapporto segnale-rumore può essere superiore a 10dB. IMBALLAGGIO, TRASPORTO E RECLAMI • L’imballo è stato so oposto a test di integrità secondo la procedura ISTA 1A. Si raccomanda di controllare il prodo o subito dopo l’apertura dell’imballo.
INFORMAZIONI GENERALI Grazie per aver scelto un prodo o PROEL. La nuova serie WEDGE di PROEL è una serie completa di monitor da palco a vi, studiata per offrire non solo ai service ed ai professionis ma anche ai musicis non professionis , una soluzione efficace per il monitoraggio ad un prezzo par colarmente vantaggioso. Ciascuno dei tre modelli WD garan sce una perfe a intelligibilità ed un o mo livello SPL, in un cabinet leggero e compa o.
6. sele ore PRESET MONITOR/FOH Perme e la selezione fra due differen impostazioni di equalizzazione, ada ate a due differen usi. MONITOR Ada o per l'uso del sistema come monitor di palco o mizzato per ridurre fenomeni di feedback. FOH Ada o al pico uso per il rinforzo del suono con l'altoparlante montato su supporto da pavimento. 7. POWER (interru ore di accensione) L'altoparlante è acceso "ON" quando è nella posizione "I". Usarlo per accendere o spegnere l'altoparlante.
PROEL S.p.A. (World Headquarter) Via alla Ruenia 37/43 64027 Sant’Omero (TE) - ITALY Tel: +39 0861 81241 Fax: +39 0861 887862 www.proel.com REV.