User Manual

Useful tools to set up properly a vercal array system using the SW215A subwoofer

This is a list of tools that can be very useful to set properly a vercal array system with the SW215A acve subwoofers.

CABLE TESTER

It is a good pracce to check all cables before each installaon, because even one faulty cable can compromise heavily the

system performance.

INCLINOMETER WITH LEVER

This tool can be used to verify the vercal array angle. It can be used at the top or at the boom of the array In this

case you have to sum all splay angles, so the maximum precision is needed for aiming the vercal array, parcularly

for long throw applicaons.

LASER DISTANCE METER

This instrument can be useful to measure the height of the vercal array and to know the distance between FOH-Subs and FOH-Array

for seng the delay me.

SMAART or similar acousc measurement system

These are useful to measure delays, phase and response of the system.

not pressed

pressed

last device

network

AX2065A

USB2CAN

PC NOTEBOOK

USB 2.0 port

AX2065A

AX2065P

AX2065A

AX2065P

SW215A

STATUS

CONVERTER

USB2CAN

CODE:

S/N:

RATINGS:

RoHS COMPLIANT

MADE IN ITALY

USB2CAN

00001

5V --- 200mA

EXAMPLE OF PRONET NETWORK WITH AX2065A AND SW215A