User Manual

PRESET
The SW115A has three factory presets already stored inside the CORE DSP, these preset are ready to use the sub in combinaon with AX2065A
vercal array loudspeaker or any other professional audio system:
STANDARD PRESET: the response starts at 45Hz and the cuto is at 100Hz with LR 24dB/oct., use this preset for almost any applicaon at ground
stack and it must be used with the SW215AF set as own (see FLOWN SET UP).
INFRASUB PRESET: the response starts at 39Hz and the cuto is at 60Hz with LR 24dB/oct., use this preset when a very deep bass response is
required, it must be used at ground stack only, alone or in combinaon with some other boxes set as STANDARD, absolutely do not use it in
combinaon of CARDIOD preset. NOTE: INFRA and STANDARD PRESET must NOT be used together in close units.
CARDIOD PRESET: the response of this preset is the same of STANDARD preset but when combined together as described further the sub stack is
capable to cancel tha bass in the backwards, absolutely it must be used in combianon of other two boxes and at ground stack.
AIMING and SUSPENDING INSTRUCTIONS (SW215AF only)
PREDICTION: EASE Focus 2
To aim correctly a complete system we suggests to use always the Aiming Soware - EASE Focus 2:
The EASE Focus 2 Aiming Soware is a 3D Acousc Modelling Soware that serves for the conguraon
and modelling of Line Arrays and convenonal speakers close to reality. It only considers the direct
eld, created by the complex addion of the sound contribuons of the individual loudspeakers or
array components.
The design of EASE Focus is targeted at the end user. It allows the easy and quick predicon of the array
performance in a given venue. The scienc base of EASE Focus stems from EASE, the professional
electro- and room acousc simulaon soware developed by AFMG Technologies GmbH. It is based on
the EASE GLL loudspeaker data le required for its use: AXIOM_AX Series_v2_0.GLL, please note that the version must be 2.0 or more. The GLL
le contains the data that denes the Line Array with regard to its possible conguraons as well as to its geometrical and acouscal properes.
For detailed explanaon of how to use the soware and how to obtain a correct aiming refer to EASE Focus documentaon and other on-line
manuals (hp://focus.afmg.eu/index.php/fc-soware-en.html).
WARNING! CAREFULLY READ THE FOLLOWING INSTRUCTIONS AND CONDITION OF USE:
• This loudspeaker is designed exclusively for Professional audio applicaons. The product must be installed by qualied personal only.
• Proel strongly recommends that this loudspeaker cabinet be suspended taking into consideraon all current Naonal, Federal, State and
Local regulaons. Please contact the manufacturer for further informaon.
• Proel do not accept any liability for damage caused to third pares due to improper installaon, lack of maintenance, tampering or
improper use of this product, including disregard of acceptable and applicable safety standards.
• During assembly pay aenon to the possible risk of crushing. Wear suitable protecve clothing. Observe all instrucons given on the
rigging components and the loudspeaker cabinets. When chain hoists are in operaon ensure that there is nobody directly underneath or
in the vicinity of the load. Do not under any circumstances climb on the array.
FLOWN SET UP (SW215AF only)
Suspending the sub-woofers has dierent advantages and some incovenient. One incovenient is that it’s not possible to use the cardioid
conguraon, while another one is that as the sub-woofers don’t couple with the ground and indoor usage can have dierent behaviours
depending on ceiling and walls. The advantages are that the space underneath the stage can be free from subs, the coupling between sub and
sat is beer and, using a column of 4-6 sub boxes, the basses can be steered more deeply into the audience with a more uniform distribuon of
the low frequencies.
The SW215AF subwoofers can be suspended alone or at the top of a vercal array of AX2065A loudspeakers using the KPTSW215 y bar. The
boxes are linked together in a column using a series of couplers integrated in the frame of each enclosure. Each system can be set properly both
acouscally and mechanically, using the aiming soware.
Coupling the system in the front does not require any adjustment: using two locking pins, each loudspeaker box is xed to the previous. The sloed
bar in the back is inserted in a U-shaped frame that features a series of numbered holes. Sliding the sloed bar in the U-shaped frame of the
next loudspeaker and inserng a locking pin in one of the numbered holes, it is possible to adjust the relave splay angle between two adjacent
+15
+10
+5
0
-5
-10
-15
-20
-25
-30
-35
20 50 100 200 500 1K 2K 5K 10K 20K Hz
SW215A - PRESET RESPONSE
INFRA
STANDARD