Dragon Touch Proexpress Distributor LLC User manual For E70 1
Content Content .............................................................................................................................................. 2 1 Introduction .................................................................................................................................... 4 1.1 Acknowledgement ............................................................................................................... 4 1.2 Attentions ....................................................
7.2 Email ................................................................................................................................. 66 8 Other Application Procedures ...................................................................................................... 69 8.1 Clock ................................................................................................................................. 69 8.2 Calculator ..........................................................................
1 Introduction 1.1 Acknowledgement Thanks for your purchase of our product. E70 is high definition tablet PC. Its CPU is MTK8382, which apply the Cortex-A9, dominant frequency is 1GHz, it is based on Android 4.4.2 operation system, and easy to expand the third application procedure. The product is designed with various functions, including WCDMA, WIFI, BT, GPS,FM, voice call and so on.
1.3 Safety Instruction Before the operation of the TABLET, please read this chapter and teach your kids about these information. For further details, please refer to the safety instructions and announcement. Never use the TABLET when driving car, in order to ensure safe driving. In the medical area, please abide by related rules and regulations. Please shut down the TABLET when it is near to the medical area.
1.4 Abbreviation/Terminology Abbreviation/Terminology Full Name Description TABLET Mobile Internet Device Mobile Internet Terminal WIFI Wireless Fidelity Base on IEEE 802.
2 TABLET Introduction 2.1 TABLET Operation and Preparation Battery Charging If this navigator is first used, please use AV adaptor to fully charge it. 1. Apply the power adptor to charge for TABLET. 2.2 TABLET Status and Reminder Reminder icons When some remind message appears in your reminder window, please click column and slip the screen to open the reminder list. Choose the menu you need, and confirm the information. Then you can close the reminder window through clicking the column to slide up.
Reminder board Reminder icons will work while receiving emails, WIFI is open, you can open the reminder board to view the detailed information. Open the reminder board When the reminder column shows new reminder icon, please hold the column and slip down your finger, then the reminder board is opened.
3 Quick Start Guide 3.1 Keys Function Keys Funcction Description： Power button Short press to sleep/wake up, long press to startup and shutdown. Volume +（up） increase the volume Volume -（down） decrease the volume Click it in any interface will return to main interface. HOME button （home） Back button（back） Menu button Setting button click it in any interface will return to previous menu This button will display in menu interface. display recently browsed history 3.
power 2. When screen is open, press POWER key, the screen will be closed immediately. Open the screen when it is closed. If the screen is closed, short press POWER to open the screen. The screen will be locked open it, it will show the picture as below picture, left slide to unlock and enter into camera, right slide the unlock icon to unlock the screen. Picture 3.1 3.
When you want to use the screen keyboard typing or choose application in the main interface, you only need to touch it by your finger. Press on If you want to open some item( textbox or the link in the webpage), or shortcut and main procedure move, you can press on this item. Quickly slide or slide Quickly slide or slide indicates make quick vertical or horizoncial movement by finger. Pull Before you pull, you need to hold the it with strenghth until you pull it into the position you want.
The home page can be extended beyond the wideness of screen to provide more space, which you can put new-added shortcuts and widgets. Click the blank space in home page then slide right or left to extend to the right or left of the screen. In the home page, there are two extended pictures, as Picture 3.3. Picture 3.3 The shortcut icons management in desktop application. Create folder icon in desktop 1. Drag the icons need to be put together on one icon(can also overlay several icons)as Picture 3.4. 2.
Picture 3.4 Picture 3.5 Remove the icons in desktop 1. Long press the icons need to be remove, then on the right above of the screen, it will appear icons.
2. Drag the icon to the above of the remove icon, till the icon become red, then move your finger to delete the icon. Change the wallpaper of desktop 1． In home page, long press any blank space in main screen, it will popup a window to change the wallpaper. 2． Click the gallery or wallpaper gallery to select the wallpaper. 3.6 Visit Application Procedures in right top of Picture 3.2, enter into main interface as Picture 3.6, choose the application procedure you want to visit. Click Picture 3.6 3.
Before transmitting documents, you have to conduct storage configuration for your TABLET: 1. Connect the TABLET and computer by USB cable, the reminder column will show the remind information. 2. Open the reminder board; please view the TABLET status and reminder to learn how to open the board. 3. In the reminder board, click the “USB Connected”, it will as below Picture 3.4, then click “open USB storage configuration”. 4. Now the USB is connected successfully. Picture 3.
keyboard. The keyboard contains below typing options: 1. Android keyboard 2. Google Pinyin Choose the typing method you want 1. Click Setting pocedure application. 2. Click Language and Keyboard. 3. In the text setting area will reveal all the installed words-typing methods in your TABLET. 4. Tick the typing method you want. Use and switch of input method ⑤ ① ④ ② ③ Picture 3.
3 click to insert the space 4 click input to execute 5 delete the character in the left of cursor, click and hold to delete all the characters in the left og the cursor. 3.9 Operation Technique Enter widgets interface In the application interface,click widgets on the above of screen, or slide the screen, it will swtich into widgets interface. Long press any widget to create its shortcut, then you can enter into the application through the shortcut icon.
4 Basic Setting 4.1 SIM Management 4.1-1 Voice call Click settings in main menu, choose SIM Management, Click voice call, choose defaulted SIM card, as Picture 4.1 Picture 4.1 4.
SIM card when makes video call, as Picture 4.3 Picture 4.3 4.1-3 Message Click settings in main menu, choose SIM Management, click message, choose the defaulted SIM card when sends message, as Picture 4.4 Picture 4.4 4.1-4 Data Connection Click setting application in main menu, choose SIM management, click data connection, choose the defaulted SIM card, as Picture 4.
Picture 4.5 4.2 Wireless and Internet 1. Connect Wi-Fi 1) In the main menu or interface, choose setting application procedure. 2) Click WLAN, open wifi, TABLET will automatically search the available Wifi wireless internet. As Picture 4.6 3) Choose the Wi-Fi internet you want to connect, if it has password, it will popup the password window, enter password, click connect.
Picture 4.6 2. Add Network Click icon in right top, as Picture 4.7 Picture 4.7 Input network SSID, the wireless network name, click save. Click user name already saved, click connect to use network, as Picture 4.
Picture 4.8 3. Network Notice If you open Network Notice, when WIFI signal appears, the right bottom will remind you available WLAN network, as Picture 4.6 4. Keep WI-FI on during sleep.. 1. Click icon in right top of Picture 4.8, select advanced. 2. Click Keep WI-FI on during sleep, as Picture 4.9 Picture 4.9 4.3 Bluetooth Bluetooth function operation 1.
2. Click bluetooth and open it. 3. If somebody open bluetooth in your surroudings, click search device in right above, then TABLET will automatically search the bluetooth device nearby. As picture 4.10 Picture 4.10 4. Click the available Bluetooth device, it will popup request window, enter into related password, and match the device to connect. 5. After match successfully, choose the operation you want to, click Picture 4.11.
Picture 4.11 Bluetooth setting 1. Rename tablet Click icon in right top of Picture 4.10, as Picture 4.12, select rename tablet, you can rename it as you want Picture 4.12 2. Check visibility timeout Select visibility timeout setting in Picture 4.12, choose the time you want to set, as Picture 4.
Picture 4.13 3 Display the file you received Choose display the file you received in Picture 4.12, you can view download and upload files. 4.4 Data Usage Check SIM card data usage, as Picture 4.
Picture 4.15 Check WIFI data usage Click icon in right top of Picture 4.15, click Data Usage, as Picture 4.
Picture 4.16 4.5 More 4.5-1 Airplane Mode Airplane Mode can turn off WIFI and GSM card function quickly, when airplane mode is turned on, WIFI and GSM can’t get any signal, then airplane mode is turned off, WIFI and GSM module will recover to previous state. 4.5-2 VPN Open VPN, click add VPN network, as Picture 4.17. Input name and server address, then save.
Picture 4.17 Click VPN, as Picture 4.18, input VPN user name and password, click connect.
Picture 4.18 4.5-3 Network sharing and portable hotspots Portable WI-FI hotspots 1. Click setting application in main menu. 2.
Picture 4.19 Picture 4.20 3.
hotspots. Picture 4.21 4. Set passwords you want to, password should be more than 8 numbers. 4.5-4 Mobile Networks 1. 3G service Click 3G service, as Picture 4.22, choose available defaulted SIM card, GSM is 2G network, WCDMA is 3G network. Picture 4.
2. Access Point Name( APN) Click mobile network, as Picture 4.23 Picture 4.23 Choose access points name (APN), choose SIM card you need to connect, Choose connect type, as Picture 4.
Picture 4.24 Remark: (CMWAP transmitters data through GPRS, the webpage it visit belongs to wap webpage, and CMNET support www browse mobile phone network, it can also log in webpage in computer. And the charges are also different.) 4.5-5 GPRS data prior mode After Open GPRS data prior mode, systems will priority chooses your network. 4.6 Contextual Model 1. Open settings, click contextual model, as Picture 4.
Picture 4.26 2. Click standard to enter into Picture 4.27 Picture 4.27 1. Vibrate In picture 4.27, click vibrate, TABLET will vibrate when someone calls you. 2. Volume In picture 4.27, click volume, you can set ringtone, notice, and alarm volume, as Picture 4.
Picture 4.28 3. Voice call Ringtone In picture 4.27, click voice call ringtone to choose voice call ringtone, as Picture 4.
Picture 4.29 4. Video call ringtone In Picture 4.27, click video call ringtone to choose video call ringtone, as Picture 4.
Picture 4.30 (Note: Except standard, silent, meet, outdoor are only for selection, they can’t be set.) 4.7 Display 4.7-1 Adjust the screen brightness 1. Click Setting application procedure. 2. Click display, choose brightness, 3. Drag the portlito to adjust the brightness volume.As Picture 4.
Picture 4.31 4. Click OK after brightness is adjusted. 4.7-2 Wallpapers 1. Click setting application. 2. Click display, click wallpaper. 3. You can choose different wallpapers as you like—live wallpapers---gallery(user defined)---wallpapers (system defect)---video wallpaper, as Picture 4.32 Picture 4.32 4.7-3 Auto rotation System is defaulted as open auto rotation, when it is turned off, system won’t rotate TABLET screen by G-sensor. 4.
1. Click setting appliation. 2. Click display. 3. Click sleep. 4. Set the sleep time as you want, as Picture 4.33 Picture 4.33 4.7-5 Font size Click font size to adjust the font size, as Picture 4.
Picture 4.34 4.7-6 Cast Screen setting 1. Use Cast Screen connector, in the right bottom of TABLET, it will remind Cast Screenconnector is connected. 2. Click Cast Screen setting, as Picture 4.35 Picture 4.35 4.7-7 Enable TP proximity senser 4.8 Open setting function, click memory, click preferred install location, you can choose isntall new application to choose preferred install location. Check SD card and TABLET storage space. 1. Enter into setting application. 2.
System storage is the spcae TABLET leave for system file, as Picture 4.38. it can’t be viewed. Picture 4.38 (2)Internal storage Internal storage is TABLET local NAND storage, as Picture 4.39, if you need to check the storage content, you can check it in main menu.
Picture 4.39 3. SD card You can check storage space, SD card available space, unmount SD card and erease SD card, as Picture 4.
Picture 4.40 Safely remove SD card 1. Click setting application. 2. Click memory. 3. Click uninstall SD card. 4. Now you can remove SD card safely. Note: Removing SD card safely can protect SD card and increase its lifetime. 4.9 Battery Click setting function, select battery, you can view the battery situation, as Picture 4.
Picture 4.41 4.10 Application program 1. Click setting application in Apps. 2. Select application, after enter, you can manage and delete installed application and check system used storage space and left space. (As Picture 4.42) Picture 4.42 3. View the working device, used space and available space, as Picture 4.
Picture 4.43 4.11 Account and Sync 1. Select setting application 2. Open account and sync, as Picture 4.45 Picture 4.45 3. Click add an account, as Picture 4.
Picture 4.46 4. After successfully load, it will open the sync function, as Picture 4.47 Picture 4.47 4.
Click setting, select location service, as Picture 4.48 Picture 4.48 4.13 Safety setting Set locked screen Lock the touch screen by unlock icon or password to protect your TABLET. Note: After setting screen locked, you should enter the passcode each time when you startup or screen is locked Set unlocked picture 1. Click setting application in main interface. 2. Click safe. 3. Click locked the screen. 4. Choose picture in text setting area. 5. Click next following the remind message. 6.
Picture 4.53 Set unlock PIN code 1. Click setting application in main interface. 2. Click safe. 3. Click screen locked. 4. Choose PIN in text setting area. 5. Enter new PIN code(numbers) and click continue. 6. Ener new PIN code again and click confirm. Set unlock password 1. Click setting application in main interface. 2. Click safe. 3. Click screen locked. 4. Set password in text seting area. 5. Set new password(letters and numbers) and then click continue. 6.
Picture 4.54 Note: Manual installing APK files needs to turn on unknown source. 4.14 Language and Input Method Click setting, select language and input method, choose language to switch language, as Picture 4.55 Click setting, choose language and input, choose Android keyboard setting, click input language, as Picture 4.
Picture 4.56 Choose the language you want to change in the language list, as Picture 4.57 Picture 4.57 Return to langauge and input method, click default, as Picture 4.
want to use Picture 4.58 4.15 Backup and Reset Connect WIFI and login your google account, choose backup my data, system will backup your data into google server. If you need to recovery factory reset, please click reset, as Picture 4.59, if you need to formulate NAND, please click reset tablet. Picture 4.
4.16 Date and Time According to the preset, system will voluntorily apply the date, zone, and time provided by internet. Manual set date, time and zone 1． Click Setting application procedure. 2． Slide down the screen, then click date and time. 3． Turn off “auto setting of date and time”. 4． Turn off “auto setting zone’. 5． Click Zone Selecting, then choose the zone lists. Slide down the list to view more zones.
Picture 4.60 Note: If you use the time internet provided, you will not able to set the date, time and time zone. 4.17 Fixed-time Startup and Shutdown Click it into 1. 2. 3. Click Setting application procedure fixed-time startup Click fixed-tine startup and shutdown. setting Operate as below Picture 4.61 Turn on fixed-time startup Click it into fixed-time shutdown setting Turn off fixed-time shutdown Picture 4.61 4.18 Assisstance Function 4.18-1. Large size Click it to make system font large size 4.
4.19 Engineer Selection 4.19-1 USB adjustment After opening USB adjustment, you can use some software to read TABLET software, but when USB adjustment is turned on, USB storage needs to manual adjust. 4.19-2 Keep awaken state If you open keep awaken state, it wll never auto sleep when your TABLET is charging. 4.19-3 Pointer Location If you open pointer location, it will display touch vertical and horizontal direction. 4.
No and so on. 3. Click state message, check battery state, battery volumne, SIM state, IMEI number, IP address.
5 Multi-Media 5.1 Music Enter into music player: in menu or desktop click music click the music you want to play, as Picture 5.1: Pictu re 5.
Pause/play Song name Next song Previous song Picture 5.2 Drag the progress bar to adjust play progress. Operation of music player button as Picture 5.2 5.2 Video Enter video player: choose to play. Operation of video player button as Picture 5.
Play/pause Adjust play progress Choose the screen mode Picture 5.3 5.3 Photo Gallery Photo gallery application can auto search photos and video files in SD card, and photo gallery will classify these photos and videos in folder. You can apply photo gallery to view and edit photos, set the photos as wallpaper and watch the video. View pictures 1. Click gallery application in main interface. 2. Enter into gallery, click the folder you want to view. 3.
1. Open a picture, use virtual key to click menu key, display menu selection. 2. Click slide show, it will auto loop play(or choose button in picture folder) Crop 1. Click menu key to display menu selection. 2. Then click crop, click and drag related area to adjust the cropper. 3. Click cropper and drag it inside and outside to adjust the image. 4. After adjust the size you want, click crop. 5. If you wish to give up to crop, click cancel to return to picture browse. Edit 1.
Switch camera front/back Camera mode camera shooting mode Picture 5.4 5.5 FM Radio in the main interface or desktop to enter into FM radio interface: Click Radio button operation instruction as Picture 5.
Enter into channel list Save button Current frequency Previous channel Next channel Picture 5.5 Click search to search FM band, as Picture 5.6 Picture 5.
channel, and the channel will be saved in channels list. Note: You need to insert earphone as antenna when using FM radio, If no antenna, your TABLET can’t search any frequency band. 6 Communication Function 6.1 Phone 1 Click Phone application procedure 2 Operate as Picture 6.
Picture 6.1 6.2 Text Message 1 Enter into main menu, choose application procedure. Menu(discard,insert text and settings) 2 Click “Edit new message” Add receiver Send message Directly input phone number Picture 6.2 6.3 Contact List Click Contact list in the main interface, en ter into the contact list as Picture 6.
Picture 6.3 Search contact: click Add contact: click button, enter into search function button, enter into add contact interface. 7 Internet 7.1 Browser In case of Wi-Fi or mobile internet is connected well (Please refer to Chapter 4.1 for wireless and internet setting), click IE browser in the main menu or desktop to enter the IE interface, as Picture 7.
Address column Save bookmark Picture 7.1 Click address bar to input the website, click start, enter into related webpage, then you can browse the website information, as Picture 7.1.2 and you can click the menu you can refresh ,save to bookmarks,,share page,bookmarks,,history and setting the webpage.
Picture7.1.2 7.2 Email Email application procedure contains email setting guide, you can add the external POP3 OR IMAP email account of normal web email service provider (For instance, Yahoo, Gmail, Hotmail and 163),as Picture 7.
Picture 7.2 a. Email Setting 1． After you click the sending email icon , you can see the email setting guide, which can help you to set. 2． Input your email address and password. 3． Click “Next step” button, choose your email type is POP3 or IMAP. 4． Click “Next Step” button to check whether the email box servicer can receive or send emails 5． Input the email account and display the email subiject, and click finish. 6． If the email box is available, you will enter into your mail box automatically. b.
c. Send E-mail 1． Click to display your mail box. 2． Click the inbox, it will refresh the new emails automatically; click it to read new email. 3． Press Menu key. Menus will popup. 4． Click Edit to enter into new email editing interface. 5． Input the receiver’s email address. 6． Input the subject and email content. 7． If you want to add attachment, click menu key, the menu popup. 8． Click “Attach file” (photo,music, video,contacts). 9． Click “send” to send the email out. Picture 7.
8 Other Application Procedures 8.1 Clock Click Clock procedure, enter into below interface as Picture 9.1. There are clock, picture, music and homepage buttons. Set alarm Picture 9.1 8.2 Calculator 1. Click . 2. Enter into the basic board of calculator. 3. Soft touch the numbers or operator in calulator to calculate.
Pictuer 9.2 8.3 File Manager File manager will copy, cut, delete, rename the documents or the folder in the TF card, it also will share the files, install apk etc. In the main menu or desktop, click the document manager icon manager.
RAM External SD card Picture 9.3 a、Copy, cut, delete, rename the files and folder: choose the file or folder, long pressthe file or folder to enter into the interface as Picture 9.4, you can operate the file or folder. Picture 9.4 b、Paste the copy or cut file: choose the file you want to paste, choose right top enter into Picture 9.5, choose right top icon to enter into Picture 9.
Picture 9.5 Picture 9.6 C.
Picture 9.7 d、Install apk file：Choose the file suffixed .apk in the file manager, you can install the third part software as reminder. e、Build new folder: Choose the menu you want to build the file, click icon in right top, choose new folder, you can build new folder as reminder. 8.4 Recorder In the main interface or desktop, click recorder icon record key to start record. Click Stop key to enter into record interface, click to stop recording. Click Play key to play the recorded sound.
Picture 9.
9 Installation of Procedures 9.1 Installation Install the third party application procedure 1. Click “file manager” application procedure; choose the application procedure you need to install. 2. Hold the application procedure you need to install. 3. It popup install, click install apk. 4. Finish the installation as guide, it will operate. Note: The third party procedure searched from internet to use on the system are all suffixed with .apk. 9.2 Uninstall Uninstall application procedure 1.
10 Troubles Shooting 1. The first startup of TABLET is slow After the TABLET system upgraded, the first startup need to install the pre-installed application softwares, the lead time is around 2-3 minutes, the startup afterwards will be much quicker. 2. 3. TABLET can’t connect Wi-Fi Make sure the wireless router of internet service can work in normal. Ensure the TABLET and wireless router in certain distance, and no wall or other barrier between them.
11 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital devi ce, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protecti on against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with the instructio ns, may cause harmful interference to radio communications.
