User's Manual

There are 6 modes: Video, Photo, Burst Photo, Time Lapse, Playback, Settings. To adujst camera
specifics for video, photo, exposure, language and more, go to Settings to set
it up.
Instructions
Overview of Basic Functions
Welcome to use your AKASO Action Camera. To record or take pictures, Micro SD card (not
included) is a must.
Micro SD card specifications:
MicroSD/Micro SDHC/Micro SDXC
Class 10/ UHS-I
up to 32GB （compatible with 8GB, 16GB, 32GB)
Format the SD card first on this camera before using. Regularly formating the SD card will
maintain the card in good working condition. Before formatting, be sure to back up all the files in
your SD card.
Battery
Please make sure the battery is full of power when use it for the first time.
Charge the battery: connect the camera to a computer or USB power supply. When it's charging, the
light remains ON. When fully charged, the light will turn OFF.
Power ON/ Power OFF
To power ON, Press the Power/Mode Button; To power OFF, press and hold the Power/Mode Button.
Waterproof Case
FCC Requirement
Changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy, and if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
IC Caution:
RSS-Gen Issue 4 December 2014"&"CNR-Gen 4e Décembre 2014:
- English:
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation
is subject to the following two conditions: (1) This device may not cause
interference, and (2) This device must accept any interference, including
interference that may cause undesired operation of the device.
- French:
Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitationestautorisée aux deux conditions
suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareildoit accepter tout brouillageradioélectriquesubi, mêmesi
le brouillageest susceptible d'encompromettre le fonctionnement.
FCC ID:S5V-D0EKV1
IC: 22901-D0EKV1