User's Manual
If the phone considers the card is illegally used, Unauthorized to use will appear if someone wants to activate the
MSD, namely the corresponding functions under the MSD menu can not be used. If other cards are used to power
on the phone and the password is correct, the number of the messages will be counted form 0, and the peompt
Bind the card or not will appear. Choose Bind the card, the phone will update the IMSI card information,
regarding the card as the appointed card of the phone.
Start: Firstly set the password to start this function, input the guardlock password and notify the mobile
phone when starting (Receive illegally using SIM card of this mobile phone and send the information about
the illegal SIM card), the settings is comleted, and the guardlock function can be started.
Cancel: To cancel the MSD. You have to input MSD password when canceling the function.
Change password: Change the MSD password.
Warning:
Please use this function cautiously. You can not use the phone if you forget the password.
Fixed Dialling:Start and close of the fixed dialling, and management of the fixed dialling list.
Blacklist: Settings of the blacklist and management of the list.
File Management
File manager can manages the files in the memory card.
Copy Files
1. For copying the files, press to pop up the menu, and enter into the copy mode.
2. Select the target folder, click the confirm icon on the right or click “select the contents” in the folder.
3. Click “Mark” to copy multiple files.
New Folders
1. Open the file manager.
2. Press Menu button → New Folder.
3. Input folder name and click to save.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user
must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be
co-located or operating in conjunction with any other antenna or transmitter.
The mobile device is designed to meet the requirements for exposure to radio waves established by the Federal
Communications Commission (USA).
These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue.
The highest SAR value reported under this standard during product certification for use when properly worn on the
body is 1.379
W/kg.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
– Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void
your authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause
harmful interference.