Instruction Manual

13
• If the lines cannot be separated, use shielded lines and create a ground from the shield
line.
• Use noise-reducing external wiring methods to increase overall system reliability.
• To prevent power surges or noise interference, use ducts to separate all DC I/O or
current circuit wires from communication cables.
• To prevent malfunctions due to noise, communication cables must be wired sepa-
rately from high-frequency lines and power lines such as high-voltage lines, high-
current lines, and inverters.
14. Dimensions
14.1 Dimensions
82 [3.23]
41.15 [1.62]
71 [2.80]
6 [0.24]
90 [3.54]
4.5 [0.18]
69 [2.72]
5.5 [0.22]
38 [1.50]
23.5 [0.93]
4
[0.16]
2
[0.08]
6 [0.24]
Top
Right Side
Bottom
Rear
Left Side
Unit: mm [in.]
Front