Owner manual

Monitoring the Ladder Programs of the External Device on a Display

PLC Ladder Monitor Operation Manual

2-9

7 Install the CF Card onto the GP.

Reference: For details on installing a CF Card, see “GP3000 Series Hardware Manual”.

8 Connect the display to communicate with the external device.

Reference: For details on the connection, see “GP-Pro EX Device Connection Manual”

9 Start up the Ladder Monitor.

There are four ways to start up the Ladder Monitor.

• System menu

• Switch parts

• LS area

• System variables:

#H_LadderMonitor (no cache)

#H_LadderMonitorCache (with cache)

Ladder Monitor

Startup

Detail

Start up with the

System Menu

On the screen, touch the top left → on the bottom right (or the top

right → on the bottom left) in this order within 0.5 Seconds to

display the system menu. Touch the [Ladder Monitor] button to

display the main screen.

• To start up using switch parts or the LS area, see the following pages.

)Setup Procedure “ Start up procedure from switch parts” (page 2-5)

)Setup Procedure “ Start up procedure from the LS area” (page 2-7)

Ladder

Monitor