User guide

GP3000 Series Hardware Manual
4-86
Cable Attached Dimensions
Unit: mm[in.]
Panel Cut Dimensions
Unit: mm[in.]
• All the above values are designed in case of cable bending. The dimensions given
here are representative values depending on the type of connection cable used.
Therefore, they are all intended for reference only.
• Please read “8.1 Installation” before designing the Panel Cut.
10[0.39]
AUX Connector
Bottom
Rear
AUX
Connector
12.7[0.50]
10[0.39]
20[0.79]
24[0.94]
Left side
Right side
The DC type unit has the
power supply terminals
shown above.
8.4[0.33]
30[1.18]
383.5
+1
-0
282.5
r ≤ 3 [0.12]
Panel thickness area
1.6[0.06] to 10.0[0.39]
[15.10 ]
+0.04
-0
+1
-0
[11.12 ]
+0.04
-0