User guide

GP3000 Series Hardware Manual
3-16
N: Power Input Terminal Block (AC model), Power Plug Connector (DC model)
O: CF Card Cover
The CF Card I/F and Dip Switches are located in the CF Card Cover open. This cover must be closed when
accessing the CF Card.
P: Audio Input Interface (L-IN/MIC) (AGP-3650T/U only)
This interface connects a microphone. Use for mini jack connector (Φ3.5mm).
Q: Video Input Interface (V-IN) (AGP-3650T/U only)
This interface connects a video camera. Supports NTSC (59.9Hz) / PAL (50Hz) formats. Use for RCA
Connector (75Ω).
R: Serial Interface (COM1)
RS232C/RS422/RS485 serial interface. D-sub 9-pin plug type connector. Communication method is switched
via software.
S: Serial Interface (COM2)
RS422/RS485 serial interface. D-sub 9-pin socket type connector.
T: Dip Switches
Dip
Switches
Function ON OFF Note
1
CF Card Startup Settings
(Controls unit startup
from the CF Card.)
Startup from CF
Card is enabled.
Startup from CF
Card is
disabled.
CF Card with
startup data
required.
2
*1
*1 When power supply is turned ON at dip switch 2 is ON, it starts with Transfer Mode. Usually,
use it in OFF.
Forced Transfer Mode
Forced Transfer
Mode: ON
Forced Transfer
Mode: OFF
-
3 Booking - - Constantly OFF
4
This setting controls the
forced closing of the CF
Card cover.
Forced close
enabled.
Forced close
disabled.
Used when CF
Card cover is
damaged.
1
2
3
4
ON