User Manual

GP3000H Series Hardware Manual
2-2
2.1 General Specifications
2.1.1 Electrical Specifications
2.1.2 Environmental Specifications
Power Supply
Input Voltage DC24V
Rated Voltage DC19.2 to 28.8V
Allowable Voltage Drop 10 ms (max.)
Power Consumption 16.7 W (max.)
In-Rush Current
60 A (max.)
Half width (Time duration with a current exceeding 30 A):
40 µs max.
Voltage Endurance
AC500V 20 mA for 1 minute
(between charging and FG terminals)
Insulation Resistance
DC500V 10 MΩ (min.)
(between charging and FG terminals)
Physical
Ambient Operating
Temperature
0 to 40°C
Storage Temperature -20 to +60°C
Ambient Humidity
10 to 90% RH
(Wet bulb temperature: 39°C max. - no condensation.)
Storage Humidity
10 to 90% RH
(Wet bulb temperature: 39°C max. - no condensation.)
Dust 0.1 mg/m
3
and below (non-conductive levels)
Pollution Degree For use in Pollution Degree 2 environment
Atmosphere Free of corrosive gases
Air Pressure Vibration
Resistance (altitude
range)
800 to 1,114hPa
(2000 meters above sea-level maximum)
Mechanical
Vibration Resistance
IEC/EN61131-2 compliant
5 to 9 Hz single-amplitude 3.5 mm [0.14 in.]
9 to 150 Hz constant-accelerated velocity 9.8 m/s
2
X,Y,Z directions for 10 cycle (100 minute)
Concussion Resistance
IEC/EN61131-2 compliant
(147 m/s
2
X,Y,Z directions for 3 time)
Drop Resistance
IEC61131-2 compliant
1.0 meter drop - 2 times.
Electrical
Noise Immunity
Noise Voltage: 1,000 V
P-P
Pulse Duration: 1 µs
Rise Time: 1 ns
(via noise simulator)
Electrostatic Discharge
Immunity
6 kV (complies with IEC/EN 61000-4-2 Level 3)