Manual

4
2. Package Contents
(1) Inquiry/UL/c-UL Approval (1)
(2) EX Module Unit (1)
(3) Terminal Connector
A connector for EX modules
except EXM-DDO16UK/
EXM-DDO16TK/EXM-
DMM24DRF.
For the details about number
of pieces and pins, please see
I/O Specifications of each
module. (Chapter 15)
(4) Terminal Block (nonremoval) (2
)
(EXM-DMM24DRF)
(5)
Power Supply Screw Terminal Block (1)
(EXM-ARI8LT)
*MIL Connector is not packed with EX
Module Unit.
(EXM-DDO16UK/EXM-DDO16TK)
This unit has been carefully packed, with
special attention to quality. However,
should you find anything damaged or
missing, please contact your Pro-face local
distributor immediately.
3. Supported Models and Software

Supported models
 Supported Software Version, GP-Pro EX
An LT/GP with a project file, see table for lowest version, should be used. (Version
of transfer tool should be identical.)
• LT3000 Series
• Hybrid Terminal Block (HTB)
*1
*1 Hybrid Terminal Block (HTB)-compatible and CANopen-compatible connectors and cables are
necessary for the connection to the GP3000 Series CANopen board type. For details, refer to the
GP3000 Series Hardware Manual and the Hybrid Terminal Block Hardware Manual.
LT3000 Series GP3000 Series
CANopen board type
connecting HTB
LT-3200 Series LT-3300 Series
EXM-DMM24DRF
Ver.2.6 Ver.2.6
Ver.2.61
EXM-AMI4LT
EXM-ARI8LT
EXM-AVO2HT
EXM-AMM6HT
EX Module
(Except for the five
models listed above)
Ver.2.0 Ver.2.1 Ver.2.1