Manual

3
F VM Unit Interface
*1
The interface which connects the VM unit
manufactured by Digital Electronics Corporation.
(This interface is available only in units with embedded
color LCD TFT display.)
G
Auxiliary input/output /
Voice Output Interface (AUX)
This interface is External Reset, Alarm Output,
Buzzer Output, and sound output.
H
Expansion Memory Interface
Cover
Remove the cover to add more memory.
I CF Card Access LED
Lit in green when the CF Card is inserted and the cover
is closed, or when the CF Card is being accessed.
• Do not remove or insert the CF Card when the LED
lamp is on. Doing so may damage data on the CF
Card.
J Power Connector
DC model: Power Socket Connector
AC model: Power Input Terminal Block
KCF Card Cover
-
L
AUDIO Input Interface
(L-IN/MIC)
It’s an interface to which a microphone is connected. A
mini jack connector (∅3.5 mm) is used. (Supported by
AGP-3550T, AGP-3560T, AGP-3650T/U, AGP-3750T
only)
M
VIDEO Input Interface
(V-IN)
It’s an interface to which a video camera is connected.
NTSC (59.9 Hz) and PAL (50 Hz) are supported. A
RCA connector (75Ω) is used. (Supported by AGP-
3550T, AGP-3560T, AGP-3650T/U, AGP-3750T only)
N Serial Interface (COM1)
D-Sub 9-pin plug type. RS232C, RS422, and RS485
are switched by software.
O Serial Interface (COM2)
D-Sub 9-pin socket type. RS422 and RS485 are
supported.
P Dip Switches Located inside the CF Card Cover.
*1 The Expansion Unit Interface 1 and VM Unit Interface cannot be used simultaneously with AGP-
3500T/3550T/3560T.