User Manual

Chapter 2 System Setup
2-27
2.2.3 Security
Set User Password / Set Supervisor Password
Allows a password to be set with a maximum of 8 ch aracters. When any password is not needed, do not input
any values in the [Enter New Password] and press just the [Enter] key.
Password on boot
Specifies whether a password should be needed at the Start-Up.
When no password has been set for [Set User Password] or [Set Supervisor Password], the selection is
disabled.
[Enabled] Requests password.
[Disabled] Does not request password.
Fixed disk boot sector
Specifies whether writing into the boot sector on the drive is prohibited.
[Normal] Does not prohibit writing into the boot sector.
[Write Protect] Prohibits writing into the boot sector.