User guide

Chapter 4 Specifications
4-63
 DVI-D Interface Pin Assignments and Signal Names
Connector...........................DVI-D 24-pin male
Connector set screw ...........Inch type (4-40)
Cable ..................................DVI-D cable manufactured by Pro-face
(FP-DV01-50 <5 m>, FP-DV01-100 <10 m>)
Pin
No.
Signal Name
Pin
No.
Signal Name Pin Location
1 TMDS DATA2- 13 NC
2 TMDS DATA2+ 14 NC
3 TMDS DATA2 SHIELD 15 GND
4 NC 16 Hot Plug Detect
5NC17TMDS DATA0-
6 DDC Clock 18 TMDS DATA0+
7 DDC Data 19 TMDS DATA0 SHIELD
8NC20NC
9 TMDS DATA1- 21 NC
10 TMDS DATA1+ 22 TMDS CLOCK SHIELD
11 TMDS DATA1 SHIELD 23 TMDS CLOCK+
12 NC 24 TMDS CLOCK-
• If a cable other than the specified DVI-D cable is used, product performance can-
not be guaranteed due to the possibility of noise interfering with the FP unit's
operation.
• Only when the FP-3710T series is connected with PS-2000B or PL-3000B (Revi-
sion B or more), FP-DV01-100 can be used.
• Please turn on PS-2000B's internal dipswitch 4 when you use FP-DV01-100
with PS-2000B. (The resolution that can be displayed is 1024 x 768 Become
only (XGA). )
Please turn off dipswitch 4 when you use FP-DV01-50.
• Please set PL-3000B’s internal dipswitch 5 to z sign side when you use FP-
DV01-100 with PL-3000B.
We will recommend the resolution of PL-3000B to change to the maximum
display resolution of FP additionally.
Please set it on the opposite side of z sign when you use FP-DV01-50.
1
8
24
17