User guide

FP3000 Series User Manual
2-2
2.1 Optional Equipment
All optional items listed below are products of Digital Electronics Corporation.
2.1.1 Options
2.1.2 Cables
Product Name Model No.
Corresponding
FP
Description
Rear Cover CA1-RCVLRG-01
FP-3500T Series
FP-3600T Series
FP-3650T Series
Attaches to the rear face of the FP unit.
Used together with a wall mount
adaptor, desktop stand or commercial
arm
Wall Mount
Adaptor
CA1-WMALRG-01
FP-3500T Series
FP-3600T Series
FP-3650T Series
Allows the FP unit to be attached to a
wall.
Desktop Stand CA1-STDLRG-01
FP-3500T Series
FP-3600T Series
FP-3650T Series
Allows the FP unit to be used on a
desktop or flat surface.
15-inch Unit Cover CA4-CVR15-01 FP-3710T Series
Attaches to the side face and the top
face of the FP unit.
Product Name Model No.
Corresponding
FP
Description
RS-232C Cable FP61V-IS00-O FP3000 Series
Serial interface cable (5m) used for
touch panel data transmission
between the host and the FP. This is a
straight Dsub9 pin female cable.
USB Cable FP-US00 FP3000 Series
USB interface cable (5m) used for
touch panel data transmission
between the host and the FP. The
cable type is A-B.
Analog RGB
Cable
FP-CV02-45 FP3000 Series
Analog RGB interface cable when
image signal is output to the FP from
the host. (Dsub15 pin male) (4.5m)
DVI-D Cable
FP-DV01-50
FP-DV01-100
*1
FP3000 Series
Digital Visual Interface cable used to
send the image signal from the host to
the FP. (DVI-D 24-pin male) (5 m or 10
m)
USB Front Cable CA5-USBEXT-01
FP-3500T Series
FP-3600T Series
FP-3650T Series
The cable for extending a USB Host
Interface of FP.