User guide

Chapter 2 Optional Equipment
2-3
Optional Cable Diagrams
<RGB Interface Cable Pin Connections>
Signals and signal names used with the FP and the RGB cable (optional cable) are the same as those used for
PCs. Also, the same pin is used on both sides of the optional cable so that you can connect the cable regardless
of the cable direction.
Inch is used for the pitch of the connector screw on the PC. For this reason, inch (4-40) is also used for the
pitch of the connector screw for the cable and the FP.
*1 The FP-DV01-100 can be used only when the FP3650-T41, FP-3710T Series unit or FP-
3900T Series unit is connected to a PS-2000B unit or PL-3000B unit (Revision B or
more).
• Please turn on PS-2000B's internal dipswitch 4 when use FP-DV01-100 with PS-
2000B. (The resolution that can be displayed is 1024 x 768 Become only (XGA). )
Please turn off dipswitch 4 when use FP-DV01-50.
• Please set PL-3000B's internal dipswitch 5 to z sign side when you use FP-DV01-
100 with PL-3000B.
We will recommend the resolution of PL-3000B to change to the maximum display
resolution of FP additionally.
Please set it on the opposite side of
z sign when use FP-DV01-50.
FP PC
1 Analog R Input 1 RED IN RED VIDEO 1 Output RED VIDEO 1
2 Analog G Input 2 GRN IN GRN VIDEO 2 Output GRN VIDEO 2
3 Analog B Input 3 BLU IN BLU VIDEO 3 Output BLU VIDEO 3
4 Reserved - 4 NC NC 4 - NC 4
5 Digital ground - 5 GND GROUND 5 - GROUND 5
6 Return R - 6 RED GND GROUND RED 6 - GROUND RED 6
7 Return G - 7 GRN GND GROUND GRN 7 - GROUND GRN 7
8 Return B - 8 BLU GND GROUND BLU 8 - GROUND BLU 8
9 Reserved - 9 NC NC 9 - NC 9
10 Digital ground - 10 GND GROUND 10 - GROUND 10
11 Reserved - 11 NC
MONITOR
SENSE(COLOR)
11 -
MONITOR
SENSE(COLOR)
11
12 DDC DATA
Input/
Output
12 SDA SDA 12
Input/
Output
SDA 12
13 H.SYNC Input 13 HSYN HSYN 13 Output HSYN 13
14 V.SYNC Input 14 VSYN VSYN 14 Output VSYN 14
15 DDC CLOCK
Input/
Output
15 SCL SCL 15
Input/
Output
SCL 15
FG FG - FG FG FG FG