User guide

FP3000 Series User Manual
4-6
4.1.3 Interface Specifications
Analog RGB Interface
 Display Area
The number of dots (pixels) displayed are as follows.
Input signal type Analog RGB
Input signal
characteristic
Image signal: analog RGB
Synchronous signal: TTL level, negative polarity or positive polarity
Scanning type: non-interlaced
Setting via OSD
(On Screen Display)
• CONTRAST
• H-POSITION
• H-size
• DIMMER (BACKLIGHT)
• ALL RESET (DEFAULT)
• BRIGHTNESS
• V-POSITION
• PHASE
• SHARPNESS
Size
H.Sync.
(kHz)
V.Sync.
(Hz)
Dot Clock
(MHz)
Screen
Resolution
Expansion
(H:Horizontal)
(V:Vertical)
Display
Resolution
640 × 350*
1
31.469 70.000 25.175
× 1.0(H)
× 1.2(V)
640 × 420
640 × 400 31.469 70.000 25.175 640 × 480
640 × 400 24.827 56.420 21.053 640 × 480
640 × 480 31.469 59.992 25.175 × 1.0 640 × 480
720 × 350
*1,*2
*1 When the 350 pixel (vertical) signal setting is selected, 400 pixels, including 50 pixels at the
top and at the bottom of the screen will be enlarged and displayed at 480 pixels (1.2times).
31.469 70.000 28.320
× 0.89(H)
× 1.2(V)
640 × 420
720 × 400
*2
*2 When you use this resolution, set “ON” for “720 × 400 Mode” in the OSD (On Screen Display)
System Settings.
31.469 70.000 28.320 640 × 480