User guide

FP3000 Series User Manual

4-42

Panel Cut Dimensions

Unit: mm [in.]

• Panel thickness should be between 1.6mm [0.06in.] and 10mm [0.39in.]. Decide

the panel's thickness based on the level of panel strength required.

• Check that the installation panel or cabinet's surface is flat, in good condition and

has no jagged edges.

• Create the correct sized opening required to install the FP, using the installation

dimensions given.

• If desired, metal reinforcing strips can be attached to the inside of the panel, near

the Panel Cut, to increase the panel's strength.

SEE



Structural specifications (page4-31)

301.5 [11.87 ]

+1.0

-0

r ≤ 3 [0.12]

227.5 [8.96 ]

+0.04

-0

+1.0

-0

+0.04

-0

Panel Cut