Owner's manual

3
5) Lift up and hold one side of the
inner unit (left or right).
6) Carefully bend each backlight’s
Positioning Tab upwards until
it is clear of the Positioning Pin.
Then, slowly pull out each
backlight horizontally from its
holder.
Lift up the inner unit
4) Free the backlight power cables
from the cable clamps, and
detach the four (4) backlight
power connectors that connect
the backlights to the inverter.
Backlight Power
Connectors
• Be sure to pull out the backlights gently if they are caught in
their holders, or they can be damaged.
• When pulling out the backlight and holding the Positioning
Tab, be sure not to cut or pinch your fingers.
Positioning Tab