Manual

FP-3710K Series User Manual
2-2
2.1 Optional Equipment
All optional items listed below are products of Digital Electronics Corporation.
2.1.1 Cables
For image signal connection, cables vary depending on a device to be connected.
SEE
1.2 Cables for connecting with computer (page1-3)
Product Name Model No. Description
RS-232C Cable FP61V-IS00-O
Serial interface cable (5m) used for touch panel data
transmission between the host and the FP. This is a
straight Dsub9 pin female cable.
USB Cable FP-US00
USB interface cable (5m) used for touch panel data
transmission between the host and the FP. The cable
type is A-B.
Analog RGB
Cable
FP-CV02-45
Analog RGB interface cable when image signal is
output to the FP from the host. (Dsub15 pin male)
(4.5m)
DVI-D Cable
FP-DV01-50
FP-DV01-100
*1
*1 Only when the FP-3710K series is connected with PS-2000B or PL3000 Series (Revision B or
more), FP-DV01-100 can be used.
• Please turn on PS-2000B’s internal dipswitch 4 when use FP-DV01-100 with PS-2000B.
(The resolution that can be displayed is 1024 x 768 Become only (XGA). )
Please turn off dipswitch 4 when use FP-DV01-50.
• Please set PL3000 Series’s internal dipswitch 5 to z sign side when you use FP-DV01-100
with PL3000 Series.
We will recommend the resolution of PL3000 Series to change to the maximum display
resolution of FP additionally.
Please set it on the opposite side of z sign when use FP-DV01-50.
Digital Visual Interface cable used to send the image
signal from the host to the FP. (DVI-D 24-pin male)
(5 m or 10 m)
DVI-I - RGB
Conversion Cable
CA7-CBLCVRGB-01 A cable converting DVI-A to RGB. (5m)