Manual

FP-3710K Series User Manual
2-4
<DVI-D Interface Cable Pin Connections>
Signals and signal names used with the FP and the DVI-D cable (optional cable) are the same as those used
for PCs. Also, the same pin is used on both sides of the optional cable so that you can connect the cable
regardless of the cable direction.
Inch is used for the pitch of the connector screw on the PC. For this reason, inch (#4-40 UNC) is also used for
the pitch of the connector screw for the cable and the FP.
FP
PC
1 TMDS DATA2- Input 1 TMDS DATA2- TMDS DATA2- 1 Input TMDS DATA2- 1
2 TMDS DATA2+ Input 2 TMDS DATA2+ TMDS DATA2+ 2 Input TMDS DATA2+ 2
3 TMDS DATA2 SHIELD Input 3 TMDS DATA2 SHIELD TMDS DATA2 SHIELD 3 - TMDS DATA2 SHIELD 3
4NC - 4NC NC 4 - NC 4
5NC - 5NC NC 5 - NC 5
6 DDC Clock - 6 DDC Clock DDC Clock 6 - DDC Clock 6
7 DDC Data - 7 DDC Data DDC Data 7 - DDC Data 7
8NC - 8NC NC 8 - NC 8
9 TMDS DATA1- Input 9 TMDS DATA1- TMDS DATA1- 9 Input TMDS DATA1- 9
10 TMDS DATA1+ Input 10 TMDS DATA1+ TMDS DATA1+ 10 Input TMDS DATA1+ 10
11 TMDS DATA1 SHIELD - 11 TMDS DATA1 SHIELD TMDS DATA1 SHIELD 11 - TMDS DATA1 SHIELD 11
12 NC 12 NC NC 12 - NC 12
13 NC - 13 NC NC 13 - NC 13
14 NC 14 +5V Power +5V Power 14 - +5V Power 14
15 GND(+5V) 15 GND(+5V) GND(+5V) 15 - GND(+5V) 15
16 Hot Plug Detect 16 Hot Plug Detect Hot Plug Detect 16 - Hot Plug Detect 16
17 TMDS DATA0- Input 17 TMDS DATA0- TMDS DATA0- 17 Input TMDS DATA0- 17
18 TMDS DATA0+ Input 18 TMDS DATA0+ TMDS DATA0+ 18 Input TMDS DATA0+ 18
19 TMDS DATA0 SHIELD - 19 TMDS DATA0 SHIELD TMDS DATA0 SHIELD 19 - TMDS DATA0 SHIELD 19
20 NC - 20 NC NC 20 - NC 20
21 NC - 21 NC NC 21 - NC 21
22 TMDS CLOCK SHIELD - 22 TMDS CLOCK SHIELD TMDS CLOCK SHIELD 22 - TMDS CLOCK SHIELD 22
23 TMDS CLOCK+ Input 23 TMDS CLOCK+ TMDS CLOCK+ 23 Input TMDS CLOCK+ 23
24 TMDS CLOCK- Input 24 TMDS CLOCK- TMDS CLOCK- 24 Input TMDS CLOCK- 24
FG FG - FG FG FG FG
• The FP-DV01-100 cable’s 6, 7, 14 and 15 pins are not connected.