Manual

FP-3710K Series User Manual
4-14
Panel Cut Dimensions
Unit: mm [in.]
• Panel thickness should be between 1.6mm [0.06in.] and 10mm [0.39in.]. Decide
the panel's thickness based on the level of panel strength required.
• Check that the installation panel or cabinet's surface is flat, in good condition and
has no jagged edges.
• Create the correct sized opening required to install the FP, using the installation
dimensions given.
• If desired, metal reinforcing strips can be attached to the inside of the panel, near
the Panel Cut, to increase the panel's strength.
SEE
 Structural specifications (page4-3)
441.5
+1.0
-0
313.5
+1.0
-0
r ≤ 3 [0.12]
Panel
[17.38 ]
+0.04
-0
[12.34 ]
+0.04
-0