Owner manual

FP-2500/FP-2600 Series User Manual
2.3 Interface Specifications
2-8
Pin
No.
Signal Name
Pin
No.
Signal Name Pin Location
1 TMDS DATA2- 13 NC
2 TMDS DATA2+ 14 NC
3 TMDS DATA2/4 SHIELD 15 GND (+5V)
4 NC 16 Hot Plug Detect
5NC17TMDS DATA0-
6 DDC Clock 18 TMDS DATA0+
7 DDC Data 19 TMDS DATA0/5 SHIELD
8NC20NC
9 TMDS DATA1- 21 NC
10 TMDS DATA1+ 22 TMDS CLOCK SHIELD
11 TMDS DATA1/3 SHIELD 23 TMDS CLOCK+
12 NC 24 TMDS CLOCK-


DVI-D Interface
Pin Assignments and Signal Names
Connector: DVI-D 24-pin male
Connector set screw: Inch type (4-40)
DVI-D Cable: FP-DV01-50 <5 m> manufactured by Digital Electronics
Corporation
24
17
8
1
• If a cable other than the specified DVI-D cable is used, FP unit opera-
tion cannot be guaranteed due to the possibility of noise interference.