Owner manual

FP-2500/FP-2600 Series User Manual
2.4 Cable Diagrams
2-13
2.4.3 RS-232C Interface Pin Connections (Optional cable)
Signals and signal names used with the FP and the RS-232C cable (optional cable) are the
same as those used for PCs. Also, the same pin is used on both sides of the optional cable
so that you can connect the cable regardless of the cable direction.
Inch is used for the pitch of the connector screw on the PC. For this reason, inch (4-40) is
also used for the pitch of the connector screw for the cable and the FP.
1 CD Output 1 CD CD 1 Input CD 1
2 RD Output 2 RD RD 2 Input RD 2
3 SD Input 3 SD SD 3 Output SD 3
4 DTR Input 4 DTR DTR 4 Output DTR 4
5 GND  5 GND GND 5  GND 5
6 DSR Output 6 DSR DSR 6 Input DSR 6
7 RS Input 7 RS RS 7 Output RS 7
8 CS Output 8 CS CS 8 Input CS 8
9 NC  9 NC RI 9 Input RI 9
FG FG  FG FG FG FG
FP SIO cable PC
2.4.4 USB Interface Cable Pin Connections (Option cable)
1
+5VIN
Input
2
USB-
Input/Output
3
USB+
Input/Output
4
GND
Input/Output
1
+5VIN
Input
2
USB-
Input/Output
3
USB+
Input/Output
4
GND
Input/Output
Output
+5VIN
1
Input/Output
USB-
2
Input/Output
USB+
3
Input/Output
GND
4
Output
+5VIN
1
Input/Output
USB-
2
Input/Output
USB+
3
Input/Output
GND
4
FP
USB cable
PC